PDA

View Full Version : Enclosed Trailer mounting kits?


fairways
03-28-2005, 03:02 PM
Anyone have any good ideas about what to use to hold equipment in an enclosed trailer, besides the really expensive ones you find on the internet!

Petr51488
03-28-2005, 03:23 PM
Here's a pick of my trimmer racks that i made.. and a table..

fairways
03-28-2005, 03:36 PM
What are you attaching this wood to within the trailer, with what?

Petr51488
03-28-2005, 05:05 PM
Theres gonna be a bolt going on both sides of the flat part of the 2x4, then going into the steel beam going horizontally across the trailer.. i might put them up today and ill post a pic..

kellroy
03-29-2005, 02:17 PM
Had a friend of mine weld a 5 inch u bolt to a 4x4 piece of flat metal ,drilled holes in the 4x4 and screwed it to the wall and use it to hold a echo backpack blower works great and didn't cost 50 bucks like most bp holders.



kellroy
KLC

rodfather
03-29-2005, 04:25 PM
Etrackstorage.com is what we use...it's awesome for just about everything.

Turtle II
07-19-2006, 01:17 PM
Petr51488,,,

The racks you made with basic clamps and wood look like a great idea.

How are they working out???

Any problems / issues ??? Is the clamp tension still holding up???

Have any weed-eaters fallen from a "big bump" ???



Hope everyone is doing well

Turtle II:cool:
Eastern NC

DoetschOutdoor
07-19-2006, 03:33 PM
Ive had the same setup of the 2x4's with the clamps and they are working great, I wish I would have done this a long time ago instead of pricing around for the expensive ones. I mounted the 2x4s onto the wall using those L shaped brackets and used 2 on each side and they are not coming off anytime soon. Grabbed the wood from a construction site trash pile and spent less than $10 for the clamps and hardware