PDA

View Full Version : Pics of stripes for today


cleancutccl
04-28-2005, 01:37 AM
Just got in, had the camera with me today so was taking pictures

rsls
04-28-2005, 03:35 AM
i like it!!! i ordered my striping kit today and cant wait to start using it. :blob3:

Petr51488
04-28-2005, 11:39 AM
Looks good.. what type of mower are you using?

cleancutccl
04-28-2005, 01:27 PM
Those are done with a 36" gravely with my own striping kit attached.

Jeff@SGLC.ca
04-28-2005, 02:47 PM
Looks good, nice to see some sun, green grass and a leaf or two on the trees.

proenterprises
04-28-2005, 03:20 PM
Wow, nice stripes.

SOMM
04-28-2005, 07:32 PM
nice lines !!!!!!!!!!

(wtf is the 3rd pic of?
the catbox? -j/k j/k, lol!!)

you need to sell them on some fence seal and stain.

get big-azz cardboard cheap from appliance dealers, get a cheap pump-sprayer, add BEHR seal and stain, spray until saturated with cardboard behind what you're spraying, in the hot dry doldrums of summer = summer ca$hflow.
just an idea.

Toy2
04-28-2005, 07:36 PM
Sell them some edging, looks like a black hose is being used....nice jobs....pics of your homemade striping set-up please :)

mikeyshane331
04-28-2005, 10:29 PM
Another request for pics of the homemade striping kit.

Grass Man
04-28-2005, 10:52 PM
.... Make that three. By the way, nice strip job :).

.... Thanks in advance.
.
Another request for pics of the homemade striping kit.

cleancutccl
04-28-2005, 11:31 PM
.........................

Appalachian landscape
04-28-2005, 11:38 PM
What is that made out of? More specifically what kind of wheels are those and what are the mounted on? Looks like pvc.

gocards
04-28-2005, 11:44 PM
Stripes look great!

cleancutccl
04-29-2005, 12:09 AM
pvc are just spacers, mounted onto a stainless steel rod for the axle.

Grass Man
04-29-2005, 12:13 AM
.... What gave you the idea? That's a nice arrangement. Do you maintain DOWN pressure on your “wheeled bar”? (that is; springs, bungee cord, weights, etc.). Does a really nice job :).

.... Thanks for showing.
.
.........................

cleancutccl
04-29-2005, 12:15 AM
no need for downward pressure, the kit weighs approximately one pound per inch which gives you plenty of weight. Actually got the idea from looking at big leagues, didn't want to pay their price so I built my own, now big league was trying to sick their lawyer on me, too bad they don't have a patent :p :p :p

snap12.5
04-29-2005, 12:26 AM
id love to see some pics of stripes made by that stander!

does that striping kit ever get bent or cause damage to lawns when u are making turns with the stander??? i demoed a stander and thought about a striping kit for it but was worried that with it being so far extended, it would get damaged when turning.

cleancutccl
04-29-2005, 12:30 AM
the stander is a friends mower, he hasn't said anything about causing damage, but more for looks I've made a shorter arm for the kit to mount with. It will mount 4" away instead of the 9" arms that are on there.

bettergrass
04-29-2005, 12:55 AM
i see you dont have your sulky attached on your 36 anymore....can you still get a sulky on still with the striper installed

cleancutccl
04-29-2005, 01:19 AM
yes, but I only use my 36" on small yards so walking is easier than dealing with the sulky, I have a 60ztr for the big yards.

J-Factor
02-18-2006, 01:30 AM
cleancutccl
could u give directions on how u made it please like materials
and instructions on how u made it plz

zim bob the landscaper
02-18-2006, 11:21 AM
nice stripse and striping kit keep it up.

The Cowboy
02-18-2006, 10:32 PM
Great stripers. I need one for each of my gravely's. How much did it cost all together? My stock gravely striper is going to hell and i need to upgrade.

yardmanlee
02-19-2006, 09:46 AM
would'nt mind having the materials list either and a diagram
very nice job !!!!!

cleancutccl
02-19-2006, 02:02 PM
email me for more info. cleancutccl@yahoo.com