PDA

View Full Version : Cub 2145 HDS Rider


JDH
05-09-2005, 11:03 PM
When I start up the PTO, the blades will not engage? Could the clutch be the problem? Any help would be appreciated.

Gautreaux's LNG
05-10-2005, 09:22 AM
It could be a couple of things, get a tester and check the switch. Without the mower running make sure when the switch is pulled the power goes to the clutch. It could be the connection of the wire to the clutch also. If the clutch has an adjustable air gap that may be all it needs. You will have to check a few things but you can get an answer pretty quick. Good luck