PDA

View Full Version : BUNTON BULLET


EROSS17
03-04-2001, 01:24 PM
I've had my 36 inch bunton bullet for 4 years now, and this last season it was becoming hard to turn but only on one side. I thought the belts were just old and starting to slip, so I replaced them and it had no effect. I think maybe one side of the gear box might not be turning as fast as the other. Does anyone have any experience with this kind of problem?

Runner
03-04-2001, 01:54 PM
Though you replaced the belts with new, how is the adustment on them?

Evan528
03-04-2001, 02:01 PM
You need to adjust them! I adjust my belt driven once a month or so... very often one side wil start slipping or not turning sharp...

Grassman
03-04-2001, 04:39 PM
Your drive wheel pulley may need to be straightend. Small peices of debris get caught between it and the belt and bend the pulley. Sometimes you can take a pair of channel-locks and squeeze the pulley grooves a little tighter together. Good luck, Russ