PDA

View Full Version : 1000 gal Bowie hydroseeder and truck


muddstopper
08-01-2005, 08:07 PM
I am selling my 1969 model 1000gal
Bowie hydroseedeer mounted on a 1987
C65 Chevy single axle truck. This
hydroseeder was bought new by the Tenn
Parks department and set unused until
I bought it 2 years ago. It only had
60 hrs on it at that time. The machine
is in almost perfect running
condition. Very little rust. The
engine was locked down and all belts
rotted off when I go it. Engine,
(Wisconsin 65hp V4), was rebuilt with
new sleeves/pistons in the engine
block and runs perfectly. New seals
where installed in the pump, (4x3
Deming), and it works perfect. Machine
just needs seals replaced around
agitator shafts and is ready to work
today but will leak around shaft
seals. Truck is a 1987 C65 chevy 366
w/5sp trans over 2 sp rearend, 4 wh
disk brakes and excellent rubber. This
truck does not require CDL license to
drive. 60k + miles. Runs good but
could use a tuneup. Does not burn oil.
We recently broke out the back glass
and driverside vent glass with a
pressure washer. Will replace before
selling. Insides are a little ragged
but other wise a sound truck.

I am selling due to reorganising my
equipment. I have found that a smaller
machine as well as a larger machine is
needed to make my business more
efficient. I will demo the machine on
an actual job site to anyone that is
willing to drive here and is
interested in purchaseing the machine.
Machine and truck are located in
Murphy NC.
I will consider selling machine and
keeping truck. I will also consider
trades for other equipment, 4x4
farmtractor, skidsteer, mini trackhoe,
NO LARGE EQUIPMENT, BACKHOES OR DOZERS
Price for both is $15000. Will send
pictures on request.
Interested parties can contact me by e-mail or pm or by cell phone
828 508 6513