I NEED HELP NOW...in proccess of putting on transmision

[Orkin Yards]

w/b transmision, i have the pulley off screws out but what do i do to get the couplings pulled off the transmision so i can drop my new one in there...thank-you in advance...faster the better!

[mowerconsultant]

what brand and model mower ?
if your talking about the wheel drive belt pulleys, all you should have to do is unbolt the bearing assemblies on each side and slide the shaft and coupler assembly off as one.

[Orkin Yards]

its a 48" scag...and what do the bearing assemblies look like

[mowerconsultant]

they are the assemblies that the shafts coming out of the transmision go through
should be 2 bolts that hole each one on....
if you have aol im post it here and it will be easier to guide you through....

[Orkin Yards]

sn is jrorkin

[Orkin Yards]

sn is jrorkin