PDA

View Full Version : Hey JD Zero Turn guys.....


Killswitch
09-27-2005, 03:50 PM
Does anyone know offhand the size of the blade bolt?

Looks like a 22MM or so, but if anyone klnows for sure Id appreciate it.

New owner of a 757 here and need to tune up the blades.

Of course my sockets go up to 18MM

Im getting real tired of having to maintain and purchase two sets of tools to do simple work on vehicles and equipment anymore.

Thanks in advance.

stumper1620
09-27-2005, 04:00 PM
I use either a 24MM or a 15/16" either one works, my 24mm is what I use on my impact in the shop & 15/16 is what is on my breaker bar for field changes.
torque to 95 to 110 ft. lbs.

biglawndog
09-27-2005, 09:37 PM
I use either a 24MM or a 15/16" either one works, my 24mm is what I use on my impact in the shop & 15/16 is what is on my breaker bar for field changes.
torque to 95 to 110 ft. lbs.


Torque, whats that? :waving:

stumper1620
09-27-2005, 10:03 PM
Torque, whats that? :waving:
thats what you go by if you have too strong of a impact like I do.
blew the threads right out of one of my spindles, I run then off with the impact, run them snug with the impact & finish with my torque wrench.
300 dollar tool sits in the box, might just as well use it don't ya think?

QualityLawnCare4u
09-28-2005, 12:05 AM
Stumper is correct. changed mine this PM and I use a 15/16.