PDA

View Full Version : Need a Quick Answer! Thanx

RB
03-21-2001, 11:37 AM
Will a 48" lazer w/ultra vac fit on a 60" wide trailer (I have 60" to work with)?

Thanx.
bob
03-21-2001, 01:54 PM
According to the Exmark catalog, page 25, a 48" Lazer with an UltraVac is 61.73 inches wide.
Scraper
03-21-2001, 02:24 PM
But if you ahve an open trailer, this may fit as the widest part may be above your siderails...
bob
03-21-2001, 05:03 PM
Also if you have an open trailer, the mower deck might be able to fit between the trailer floor and the top of the side rails.
RB
03-21-2001, 06:16 PM
Thanx guys - good points!
John DiMartino
03-21-2001, 07:41 PM
RB,you might be able to back the mower on at a angle to get it on,or how hard is it to pull the chute?My Dixie 60" just fits on mu 78" wide trailer with the trac-vac on,Ive got an inch on each side.How you like the new F450?
Runner
03-22-2001, 02:11 AM
It takes about 1 minute to disconnect the blower of the side of the deck on the Ultra Vac. You can leave the bags on.