PDA

View Full Version : any info on this


RSK2
12-29-2005, 06:15 PM
Hi Guy's

I am looking for any info or pic of any trailers that have
a back gate that goes in the bed of a truck so you can back
a z in it and dump it any info will help. thanks


ROBERT

jim dailey
12-29-2005, 07:51 PM
Hi Guy's

I am looking for any info or pic of any trailers that have
a back gate that goes in the bed of a truck so you can back
a z in it and dump it any info will help. thanks


ROBERT

There was a thread about this, on here, about a year ago. I am trying to remember. I can't think of the guy's name, right now, but he was from Canada...I believe it was British Columbia. He had several pictures of the operation. If I remember correctly, he was using Walkers. Front and back gates on the trailer. He would bac-up the rear ramp and through the front of the trailer onto the bed of the truck to dump the load. The front of the trailer was also a gate...the same as the rear of any normal trailer. I suppose that it is just a matter of mechanics and engineering. Do a search, or maybe someone else will come on with the info as they remember it. Good Luck.

lawnmaniac883
12-29-2005, 07:53 PM
I have seen ONE picture of a trailer with this setup, and the person fabricated it himself. When you say "and dump it" do you want a dump trailer that will accomplish this? Either way you will need to fabricate the setup yourself or find a local fab. shop that will do it for you.