PDA

View Full Version : Starter seal coating unit


joeE
01-02-2006, 02:22 PM
I have a small system that i dont need.

150 gal low profile tank. Hand crank full sweep agi with rubber wipers. Arms
are cut & pinned & spring loaded ( bend at top & bottom of stroke, fully extend at sides). Tank is older but clean & used very little.

Brand new Ingersol Rand compressor & Graco duel dia pump. I started putting this system together last year for my son. Hes now working for a
cement contractor so I dont see any need to keep it. The only thing left
is to add a 50' hose & wand. This will make someone a good tool for many years.
$ 1,795.00 firm. NW lower MI

joeE

joeE
01-08-2006, 06:08 PM
New member cant use PM's for 30 days so contact me at
joesealer@peoplepc.com

joeE
01-30-2006, 01:27 PM
For $ 700 extra, I could swap out the 150 gal tank with a 300 gal. Hand crank, 5 to 1 reduction, close clearance steel, 1 1/2" shaft, 4 bolt bearings, 2" outlet. Older tank in good cond.

joeE
03-07-2006, 09:28 PM
Many thanks to LawnSite.com

All has been sold.