PDA

View Full Version : another enclosed question


PLS-Tx
02-21-2006, 10:27 PM
Will a enclosed trailer with 5k axles sit any higher than a trailer with 3500?

qualitylawnmanagement
02-21-2006, 11:01 PM
They sit the same I think. Some might of had a raised roof.

TURF DOCTOR
02-21-2006, 11:06 PM
Good 1, we have a box with 3500 axles and 1 with 5200 axles i will check in the morning seems like a little higher.

Eclipse
02-22-2006, 08:19 AM
Generally yes, a 9999 GVW trailer will sit a littler higher than a 7000lb trailer.

On the Interstate I ordered the 9999 GVW trailer is 3" taller than the 7000 GVW trailer. The tires added 1/2-3/4" in height and the stronger frame that is taller added 2".

On the Haulmark the frame is the same so I'm guessing the 10k will be about 1/2 - 3/4" taller due to the slightly taller tires.

PLS-Tx
02-23-2006, 11:24 PM
Generally yes, a 9999 GVW trailer will sit a littler higher than a 7000lb trailer.

On the Interstate I ordered the 9999 GVW trailer is 3" taller than the 7000 GVW trailer. The tires added 1/2-3/4" in height and the stronger frame that is taller added 2".

On the Haulmark the frame is the same so I'm guessing the 10k will be about 1/2 - 3/4" taller due to the slightly taller tires.


The frame is supposed to be the same as the 3500# axles, so the only difference should be the 1/2 - 3/4" taller tires.

Do you think I will have any problems loading and unloading ZTR's?

I hope I don't regret not getting the beaver tail. :hammerhead:

Eclipse
02-24-2006, 07:28 AM
Do you think I will have any problems loading and unloading ZTR's?

I hope I don't regret not getting the beaver tail. :hammerhead:

No I think you will be fine. I think you will be happy you did not get the beavertail. On the Haulmark the beavertail is 4' so IMHO it eats up some usable floor space.

South Florida Lawns
02-25-2006, 08:21 PM
Torsion axles or leaf sprung?

Thats also something to include.

I say they might sit higher under lighter loads because of the stiffer spring used.

PLS-Tx
02-25-2006, 10:48 PM
No I think you will be fine. I think you will be happy you did not get the beavertail. On the Haulmark the beavertail is 4' so IMHO it eats up some usable floor space.

I think you are right, I'm getting a Pace, but I would think the beavertail would be the same as the Haulmark.

I did talk to the dealer last week, and he said it should not be a problem, only difference is the slightly taller tires.

I should know for sure next week how it's going to work, he said it should be in by end of the week.

PLS-Tx
02-25-2006, 10:50 PM
Torsion axles or leaf sprung?

Thats also something to include.

I say they might sit higher under lighter loads because of the stiffer spring used.

It has Torsion axles.

Luvs2Play
02-25-2006, 10:58 PM
http://www.midplainsonline.com/proddetail.php?prod=V-Nose_Car_Carrier
This is what I got, 8'wide. I added 1/2 ply to the floor and covered it with rubber roofing material. Added floor rings and Faststraps to the floor. With the V-nose, I put in a porta pot, work table/cabinet and pegboard to take care of all the field tools and eliminate unneccesary stops. 12k axles, 7k jack. Tailgate can handle 4,000 pounds.Not quite as pricey as some, but works just as well.

Luvs2Play
02-25-2006, 10:59 PM
Mine is not a dovetail.

PLS-Tx
02-25-2006, 11:04 PM
Mine is not a dovetail.


Looks like a nice trailer.

12k axles, and no dovetail, do you run ZTR's, if so do you have any problems with deck clearance?

Luvs2Play
02-25-2006, 11:31 PM
We run ZTR's. We can get two in straight with pushmowers too. Being 8" wide there is plenty of room to get around equipment.