PDA

View Full Version : OCDC for WB

corycc
04-20-2001, 03:40 PM
Does anyone make an OCDC for WB's? What about any of you guys? Have you made your own?
Grassman
04-20-2001, 05:50 PM
I think Stone made one of these for his Toro or at least inquired about it. Check the old posts. Russ
Richard Martin
04-21-2001, 01:23 AM
The OCDC that comes on Dixie Choppers should be easily adaptable to just about any mower. It is available from any DC dealer.
corycc
04-22-2001, 01:45 PM
The DC OCDC will work even on a WB?
Eric ELM
04-22-2001, 01:50 PM
Originally posted by corycc
The DC OCDC will work even on a WB?

Take a look at the 8th picture down on my DC page on my website, I have a close up of an OCDC and see if you think it will work. DC makes them for different size decks so one should work or you should be able to adapt one of them to fit.
corycc
04-22-2001, 02:17 PM
My deck seems to be deeper than you DC. And I have a bagger bracket in the way as well as the discharge chute bracket. Also, the discharge opening curves towards the rear of the opening. I wanted to be able to operate it from behind my WB so I wouldn't have to stop every time I wanted to use it. I will probably design my own.
eslawns
04-22-2001, 10:31 PM
Why not use your foot?