PDA

View Full Version : Need help with toro w/b


Rene
03-06-2006, 09:28 PM
I have a toro 52 in. Belt driven w/b w/t T Bar .
I had it serviced last year an still have a hard time getting a straight line out of it.
It likes to dart from side to side. I bought it used and haven't use it a whole lot. I couldn't get it to work right so I bought a Exmark TT52 Are business is growing fast and i would like to use this mower.
I don't know how close i need to adjust the forward - neutral - break.
Thanks, Rene

extoro
03-06-2006, 10:17 PM
Get on Toro's website - all of their owners manuals are down loadable. Sounds like you just need to adjust the drive linkages

just Cuts
03-07-2006, 12:21 AM
It may also be the drive belts.They stretch over time.especially if your pulling a sulkie.

bwilder10h
03-07-2006, 05:46 PM
There isn't much to check on these belt drives and brakes. They are very simplistic machines. Make sure the belts are equally adjusted and they aren't too loose. Also a good idea to make sure the brakes are adjusted per the manual.