View Full Version : Nicolock Mini Colonial wall
03-09-2006, 12:22 AM
I am building a small planter wall about 45' long and 18" high along a fence. The product I am using is the Nicolock mini colonial wall stone. there are 3 different peices that make up the set. My question is when I have to make a sharp turn but not 90 degrees do I need to cut the blocks or is there another way to get a rounded, but sharp curve? Anyone know?
03-09-2006, 09:04 AM
I'm not sure of the wall block you're speaking of but most units have tabs on the back you can break off to make them curve. Not sure how tight of a radius you're talking but there are limitations as to how tight you can go
03-09-2006, 09:06 PM
I did it. I had to cut one block on each course to get the radius I was looking for. Not too bad. came out nice. the only thing I am worried about is the Caps. I will have to cut a cap and it has to be perfect, so I am a little gunshy on that. I am doing it monday when I go back to do another small wall for the customer.
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.