View Full Version : Getting rid of grease ?

03-10-2006, 08:09 PM
First and foremost, I really want to thank everyone here for their help. I finally have most of my operation up and running. Like I have said before I am not a new dog, but when you move somewhere new and you dont know a soul in the buisness, you need all the help you can get.

On my bobcat where the hydro hosing comes through the back grease fitting on the back upper arm, I have a lot of grease that has come off the fitting and is now sitting on the hose. I can only take off so much grease. Is there any other way to get this grease off?

03-10-2006, 08:23 PM
Try brake cleaner or wd40

Gravel Rat
03-10-2006, 10:44 PM
Brake cleaner is hard on rubber hoses it will dry the rubber out your better off using dish soap or even car wash soap. WD-40 will clean off most of the grease as it takes oil to clean oil.

04-05-2006, 11:47 AM
Try Spray-9 and a soft bristle brush with a light mist of water

04-05-2006, 01:59 PM
kerosene and a soft bristle brush.:waving:

gammon landscaping
04-07-2006, 01:08 AM
cold presure washer works for us. we used to use a steam system but in just smeared grease all over. the cold cuts it and it will fall off