PDA

View Full Version : Blade blocker (OCDC) with bagging setup???


G.M.Landscaping
03-12-2006, 02:22 AM
I'm thinking of building one for a WB with the side plate for the bag still mounted so you can still bag if needed.
Has anyone done this yet for some ideas before I start?
Not sure if I want a sliding version or a flap design.

macaw
03-12-2006, 08:59 AM
I got a advance cute from http://www.meg-mo.com/ it is on a Scag 52" wb
I mounted it about 1" off the deck so the bagging plate slides under it and drilled 2 holes in the cute mounting plate to bolt the bagging plate to takes less than 5
min. to put on works good just used it yesterday.

G.M.Landscaping
03-13-2006, 12:31 AM
Started on building one today. Hopfully I'll have some time to finish it tommorow and posts some pics.

G.M.Landscaping
03-14-2006, 01:30 AM
Not much response here but here they are. It needs a spring on the flap to make it work better. It opens fully and closes fully.
52472

52473

52474

Mr Ricochet
05-01-2006, 11:41 AM
Looks nice GM. How's it working out for you?

G.M.Landscaping
05-02-2006, 09:57 PM
It works out better than I hoped for. I made some changes to it since the original post to make it work better.