View Full Version : Cost to pave 300 ft driveway single wide
03-22-2006, 08:13 AM
Buffalo, NY area questions on how much would it cost to pave a single standard width driveway 300 ft long. There is currently stone at the proper grade that has been there for 5 years. I was thinking of just doing the coarse grade this year and then maybe the final fine topcoat next year. It would be from a street to a concrete slab that is in front of the garage. Thanks in advance for advice.
03-23-2006, 01:29 PM
Sorry I thought you were looking for seal coating
03-24-2006, 01:23 PM
I was not sure if this was the right spot to post, I originally started it on here on plowsite website and it redirected me to lawnsite.
Paving, Seal Coating, & Asphalt
Visit this forum to discuss all issues relating to paving, asphalt, and seal coating.
03-24-2006, 03:54 PM
You will still need to regrade the driveway and check for any grass and or weeds growing. I don't know what the going rate is around your area but here if the co that is doing the grading will charge anywhere from $1.15 to $1.75 per square foot.
04-03-2006, 01:05 AM
formula for aspahlt material ..... lengthX widthx depth=12 per inch so if its a 2 inch overlay depth is x 24 and so on... take that figure and divide by 2000 that will give you tonage so....100 longx 10 wide=1000x24=24000,divide 2000 into 240000=12 tons
vBulletin® v3.8.6, Copyright ©2000-2016, Jelsoft Enterprises Ltd.