M48 Hydro Oil Change

[JKUCSMA]

Is there an easy way to change the hydro oil,on my m48 Tank,without dropping the deck.Thanks Joe

[Restrorob]

I cut a piece of card board about 4" wide and 2' long bend it in the center to form a trough, Lower the deck all the way then break the drain plug loose. Slide the trough under the plug and remove the plug with my fingers and let it drain into a pan. Works good for me, Just done one monday. Also warm the unit up before draining.

[JKUCSMA]

Thanks,I was going to try a funnel with a hose,but your idea sounds good,Thanks again Joe