View Full Version : Bagger for the new 36" trimstar hydro mower

03-24-2006, 01:21 PM
Is there an adapter or kit that would allow a accelerator catcher to fit the new 36" trimstar hydro mower?

03-27-2006, 06:30 PM
You can use the GCSC catcher. The way you use the bracket is a bit non standard, as this mower has an unusual opening. There is a small tab with a hole in it near the front on the opening on the top of the mower. You need to use the hole in this tab to receive the pin sticking out from the catcher. The bracket should attach to the edge of the mower just behind this tab. The bracket has a hole near the front that you won't use (use the hole in the tab on the mower instead). Call us if you have any questions.

03-28-2006, 08:42 PM
Thank you!

06-11-2006, 07:59 PM
I have an accelerator on my trimstar 36... it works great! If I remember I'll get a pic up to show you how to mount the bracket.


08-14-2006, 12:21 PM
Bagger works great, now I wan the leaf extender. Do I need an adapter and is it ordered along with the extender?

08-15-2006, 04:09 PM
If your bagger has the small "hook" on top you don't need the adapter. The hook is at the rear of the bagger on top.

08-15-2006, 06:01 PM
I have the GCSC catcher, is the extender one size fits all?
Great prouct!