PDA

View Full Version : Skid Steer Attachments.......


tiredricefarmer
03-30-2006, 05:54 AM
With the right hyd. adaptors will most skid loader attachments work with any brand loader? This is a don't know till you ask type ques.......lol :rolleyes:

iowacatman
03-30-2006, 09:31 AM
Unless you have an older machine, most attachments are pretty universal, except, as you said, adaptors.

Some hydraulic attachments may require different flows and pressures to work properly.

oldrustycars
03-30-2006, 11:45 PM
the actual mounting plates seem to be universal now. i think Case was the last holdout, had an oddball one in the late 80's. i can tell you we switched from 100% bobcat to 100% caterpillar, and all the grapple buckets, hydraulic hammers, and augers all interchanged no prob. may have an issue with a real small bobcat going to a large machine, but then you wouldnt use the same size tools anyway.

UNISCAPER
03-30-2006, 11:52 PM
Gehl had it's own connections until the mid 90's, and after that everyone pretty much standardized the hydro hook ups.