PDA

View Full Version : 28hp EFI code


cward76
04-06-2006, 02:15 PM
Check engine light comes on and engine starts runing rough right before it dies.This has happened twice on two consecutive days after I have mowed a hour or so. Both times the engine was idealing because I was off the mower. First in started and ran rough for a second and then leveled out, but the second time was a different story. It would not start, so I check the code and it gave me a 31. I let the engine cool for around 15-20 minutes and tried it again. It started rough and cleared up quickly. Finished mowing with no problems. Any ideas on what may be going on. Engine is new.

Jman
04-06-2006, 05:11 PM
Code 31 is a fuel related trouble code. It may be runing too rich or too lean. To me it sounds lean. I would check fuel pressure while the engine is running under mowing conditions. The fuel pressure should be running 39 p.s.i +/- 1 p.s.i. If it falls low enough the engine can die. What type of equipment is it on??

fixer67
04-11-2006, 11:48 PM
This is for a Kohler ECU code 31