PDA

View Full Version : 3/4 in. line plug???


marcs
04-09-2006, 12:36 AM
We had the mishap of breaking a 3/4 inch PVC line flush, at the 1.5 inch manifold fitting. The manifold was built tight, and does not offer the opportunity to easily cut and replace this section. I've heard of an expansion plug that can be used, however I wondering if there's any better ideas?

Wet_Boots
04-09-2006, 09:28 AM
We had the mishap of breaking a 3/4 inch PVC line flush, at the 1.5 inch manifold fitting. The manifold was built tight, and does not offer the opportunity to easily cut and replace this section. I've heard of an expansion plug that can be used, however I wondering if there's any better ideas?Get a Rambit and drill out the remaining pipe
http://www.spacare.com/index.asp?PageAction=VIEWPROD&ProdID=3029

Dirty Water
04-09-2006, 01:33 PM
You could rebuild the manifold.