PDA

View Full Version : Ditchwitch410 & Enclosed Trailer


RRH
04-15-2006, 05:27 AM
Trying to find a covered trailer that would be set up for installs and also be able to put machine in it.Ditch witch weighs about 4000 lbs.Any one running one of these machines with a covered trailer.Can not find a trailer that will take this much weight that is enclosed.Wanted a ramp door but all that I have found will not take the weight.
Thanks
RRH

Green Sweep
04-15-2006, 08:44 AM
We put or 255 into the enclosed trailer, but not the 410. I don't think you'll find an enclosed trailer that the 410 will fit into, but could be wrong.

Rob

BSME
04-15-2006, 10:22 PM
same thing as greensweep... when I traded up to the 410 I had to stop using the enclosed trailer and bought a ditch witch trailer...

Jon I got some pics for you from our install today

Dirty Water
04-15-2006, 10:35 PM
Jon I got some pics for you from our install today

Awesome.

My daughter jammed my digital camera's lense thing, so I took it apart an attempt to unjam it, I managed to shock myself silly(Stupid Flash capacitor) and fry it...

I'm better at irrigation than camera repair.

So, thats why I haven't taken pictures in a while :laugh:

greenworldh20
04-18-2006, 11:35 PM
this trailer holds a vermeer lm 42

check it out here...

http://www.lawnsite.com/showthread.php?t=52002



:cool2:

bdb
04-18-2006, 11:53 PM
One of my customers has a 20' Pace Summit landscape trailer and puts his 410 in it with his trencher on the front of it. They up graded the axels and a heavy duty rear door. Also has the ceiling (fiberglass I think) that lets the light through. Shelves on one side and in the front.

PurpHaze
04-19-2006, 09:25 AM
this trailer holds a vermeer lm 42

check it out here...

http://www.lawnsite.com/showthread.php?t=52002



:cool2:

That is a sharp looking setup! :clapping: