PDA

View Full Version : waterbox


shepoutside
04-23-2006, 11:52 PM
Would any one have a picture of the inside of a water box for brushes? I just was wondering if there are any baffles to control water splash while in motion. Thanks in advance !!!

SealAndCoat
04-24-2006, 04:49 AM
no baffles, those would interfere with sticking the brushes and squeegees inside. Then they just have a U shaped cut-out in the lid for the handles to go thru.

Pretty simple to make one yourself. Just make a box, a hole for a drain, and a lid with a U, and a hinge. And a drain plug of course. ;)

shepoutside
04-24-2006, 05:09 PM
Ok thanks, saw the one in the seal-rite catalog, and then saw the price, so figured I'd build my own, just wasn't sure if there was anything else to it. Thanks again !!

PROCUT1
04-24-2006, 09:19 PM
Put a grate in it about 1/4 of the way up from the bottom. This way your brushes will sit on the grate and any accumulated sealer and crap will settle.

shepoutside
04-24-2006, 10:53 PM
Great idea!!! Thanks, I will weld that in tommorw night :) thanks again !!!

SealAndCoat
04-25-2006, 12:23 AM
yeah i thought the price was a bit much too, but mine came with the set-up i got :|

great idea about the grate.