PDA

View Full Version : what year is my Toro/Wheelhorse 724-Z


jjj0923
05-01-2006, 07:39 PM
I'm trying to learn that year my Wheelhorse/Toro 724-Z is.

the Model number is Z1240E03

any ideas?

PYMLscape
05-07-2006, 12:14 PM
I have a Wheel Horse Catalog with a 1987 copyright that has the 724-Z in it.

My guess would be 1987-1990?

runninglite
06-23-2006, 11:41 AM
I have a Wheel Horse Catalog with a 1987 copyright that has the 724-Z in it.

My guess would be 1987-1990?


I'm trying to get parts for this machine, but dealer can't figure out what it is. the only #'s on tag are 93-24Y1120E01 10009. the deck is a 38" #05-38SY01 it uses a belt #116666DF. also a tag on machine says Attach a Matic. I need parts for the left side drive, gears are trashed. any help out there?

runninglite
06-23-2006, 11:55 AM
I'm trying to get parts for this machine, but dealer can't figure out what it is. the only #'s on tag are 93-24Y1120E01 10009. the deck is a 38" #05-38SY01 it uses a belt #116666DF. also a tag on machine says Attach a Matic. I need parts for the left side drive, gears are trashed. any help out there? Is there any hope for me?

Mowingman
06-23-2006, 12:17 PM
I believe that machine was actually built by Dixie Chopper for Toro. Give DC a call at their factory with your S/N info. They may have parts for it.

newz7151
06-23-2006, 01:02 PM
based on the deck model number, that is a 1990 machine.

https://lookup2.toro.com/partdex/index.cfm?xCaller=Toro

Woodro350
02-01-2009, 11:57 AM
I have a 1998 Toro 724-Z which was the last year they were made.
I have had it since New with 370 hrs on it. I love it too!
Fast like the Dixie and cuts very good. Will lay down one beautiful stripe thats for sure.
I used to have a 1986 WheelHorse 718-Z that used the model 600 hydro transmission which I liked better then the 700 in the 724 toro. The 86 Wheelhorse was faster about 11mph and alot more responsive in motion cause of the different pumps but there a little louder which is no big deal to me.
I just sold the 86 wheelhorse 718-Z last year cause I bought a 2006 JD 757 Z-Trak which isnt as fast as neither one of the 724z or 718z, They lol mow better then the JD im my opinion too but the JD has a lower center of gravity for better control on banks.
I used the 718-Z mostly all the time cause it was my oldest and I was saving on the hours being put on the 724-Z thats why I have a 11yr lawn mower that has 370hrs on it and its never been used commercially untill this year in 2009.
Here is a picture of my 1998 724-Z with factory lights.

mike r
02-01-2009, 04:43 PM
I have a 1998 Toro 724-Z which was the last year they were made.
I have had it since New with 370 hrs on it. I love it too!
Fast like the Dixie and cuts very good. Will lay down one beautiful stripe thats for sure.
I used to have a 1986 WheelHorse 718-Z that used the model 600 hydro transmission which I liked better then the 700 in the 724 toro. The 86 Wheelhorse was faster about 11mph and alot more responsive in motion cause of the different pumps but there a little louder which is no big deal to me.
I just sold the 86 wheelhorse 718-Z last year cause I bought a 2006 JD 757 Z-Trak which isnt as fast as neither one of the 724z or 718z, They lol mow better then the JD im my opinion too but the JD has a lower center of gravity for better control on banks.
I used the 718-Z mostly all the time cause it was my oldest and I was saving on the hours being put on the 724-Z thats why I have a 11yr lawn mower that has 370hrs on it and its never been used commercially untill this year in 2009.
Here is a picture of my 1998 724-Z with factory lights.

very nice unit you have there 11 years old, very nice!

Woodro350
02-01-2009, 05:08 PM
Yes, And there's not even a rusted bolt on it, lol. Its also always been garaged.

Thank you for the compliment.

pugs
02-02-2009, 02:12 PM
Try this for your model number: Z1-24OE03

Just added a dash and changed a 0 to an O. Appears to be a 1990 model.

mike r
02-02-2009, 02:17 PM
Yes, And there's not even a rusted bolt on it, lol. Its also always been garaged.

Thank you for the compliment.

you're welcome

Junior M
02-02-2009, 02:18 PM
Email Toro, I've got a couple wheel horse tractors and thats how I found out the year on those..