mulching kit removal?

[cariboulou]

Just bought a '04 32" metro w/mulching kit. I'd like to remove all pieces of the kit and blades and replace it with normal blades and a chute. Is there a site somewhere I could download assembly instructions for the mulching kit and just go in reverse? there are some parts undernearth the deck that I dont know if there are part of the kit or not?

Lou

[eXmark]

Just bought a '04 32" metro w/mulching kit. I'd like to remove all pieces of the kit and blades and replace it with normal blades and a chute. Is there a site somewhere I could download assembly instructions for the mulching kit and just go in reverse? there are some parts undernearth the deck that I dont know if there are part of the kit or not?

Lou
Hello Lou,

Thank you for writing in. We truly appreciate any comments or concerns that you have on your unit.

I have attached a copy of the instruction sheet for the Mulch Kit. You can see a diagram of the parts that you will need to remove. If you have any problems, please be sure to contact us again and we can further assist you.

Thank You


Christie Moore
Exmark Customer Service Associate

[cochino12]

Just bought a '04 32" metro w/mulching kit. I'd like to remove all pieces of the kit and blades and replace it with normal blades and a chute. Is there a site somewhere I could download assembly instructions for the mulching kit and just go in reverse? there are some parts undernearth the deck that I dont know if there are part of the kit or not?

Lou


Dont know if you are looking t get rid of it but if you want to sell the mulch kit send me a pm.

adam

[hillndale]

Dear Exmark,

Would you happen to have the "instruction sheet" for the 36" TTHP. I bought an '05 used, in excellent condition, and it came with the mulch kit installed. I removed it along with the plate over the discharge, and installed "notched blades". I just want to make sure all is correct. As always, thanks for your support!

hillndale

[eXmark]

Dear Exmark,

Would you happen to have the "instruction sheet" for the 36" TTHP. I bought an '05 used, in excellent condition, and it came with the mulch kit installed. I removed it along with the plate over the discharge, and installed "notched blades". I just want to make sure all is correct. As always, thanks for your support!

hillndale
Hello hillindale,
The above attachment to caribou lou is what you need. Let me know if you have other questions.
Brian

[hillndale]

Hello hillindale,
The above attachment to caribou lou is what you need. Let me know if you have other questions.
Brian

Thanks Brian

So I removed the "birdwing baffle" & the "cover plate", but I'm still baffled, so to speak. The PDF says to remove blocker plate and cover plate. Can I assume those are one in the same? It also says to install "dogleg baffle(s)",-I don't see that. It's already there I think? All I see is the holes on the deck to reinstall "capscrews" to block screwholes in deck, to prevent sand etc from coming up through. Short of posting some pics of what I'm talking about, can you check it out from your end and tell me if I just have to install "capsrews", 'cause that's all I see is left to do.

Thanks Brian

hillndale

[eXmark]

Thanks Brian

So I removed the "birdwing baffle" & the "cover plate", but I'm still baffled, so to speak. The PDF says to remove blocker plate and cover plate. Can I assume those are one in the same? It also says to install "dogleg baffle(s)",-I don't see that. It's already there I think? All I see is the holes on the deck to reinstall "capscrews" to block screwholes in deck, to prevent sand etc from coming up through. Short of posting some pics of what I'm talking about, can you check it out from your end and tell me if I just have to install "capsrews", 'cause that's all I see is left to do.

Thanks Brian

hillndale
Hello hillindale,
You probably need the dogleg baffle, if it did not come with the mower when you bought it. Part # 1-302189-01. The blocker plate is part # 4 and the cover plate is part # 3. I hope this helps.
Brian