Grease type to use for ZTR???

[Vibe Ray]

What type of grease should I use on the fittings for my Lazer HP (Remember, no spindle greasing necessary)? Would any type of grease work better than another? Right now I just use some grease I had in the garage. Thanx!!!

[65hoss]

I use the valvoline semi synthetic.

[racerdave]

I use the same thing 65hoss uses. It's a little pricey but I like the stuff.
David

[SMB]

Right now I'm using a generic lithium grease, but I hope to get some of the "red "lubrimatic" brand grease, that stuff's good grease.

[edward hedrick]

I use Wolfs head red. My Toro was 13 years same spindle bearings.
ed

[jasonp]

I use Mobil 1 semi syntheic, seems to work pretty good. As long as you grease often looks like any grease would work ok.

[Barkleymut]

Be sure to use an EP rated grease, especially in spindle bearings.

[Keith]

I used to use Amsoil, but switched to Quaker State FCI. The Amsoil seemed to dry out. The QS is cheaper too.

[thelawnguy]

FWIW Exmark recommends not using a lithium base grease in their spindle assemblies. Wonder why?

[Ground Pounder]

I use John Deere Turf Guard. It is a blue grease formulated for high moisture. I've never seen blue grease until my dealer hooked me up with this stuff.