Old school Homelite saws.

[RedWolf]

Hey guys.I have to old Homelite chainsaws.One is a bow saw and the other is a SuperXL.Both have metal cases around the motor.I need to know if a can get new carbs for them or rebuild kits for the carbs. Both saws have Zama C2 carbs.That is the only numbers I could find on the carbs. Thanks for any help you can shoot my way guys.

[newz7151]

Hey guys.I have to old Homelite chainsaws.One is a bow saw and the other is a SuperXL.Both have metal cases around the motor.I need to know if a can get new carbs for them or rebuild kits for the carbs. Both saws have Zama C2 carbs.That is the only numbers I could find on the carbs. Thanks for any help you can shoot my way guys.


http://www.zamacarb.com/tips.html

[RedWolf]

I cant find the carb model im looking for.

[newz7151]

What is the entire carb model? Gotta be more than just C2.

A C2 (depending on the rest of your numbers) uses either a

RB-15, 16, 17 or 18 rebuild kit or a GND-08, 09, or 10 Gasket and Diaphragm kit.

http://www.zamacarb.com/pdfs/QuickKit_CR2006.pdf

There are not but a few C2 carbs listed there.. unless they have outdated some of the carbs and do not list them on the x ref.

[RedWolf]

I pulled the carb off both saws and the only numbers on them is C2.Where would the other numbers be?:confused:

[newz7151]

what is the UT number off those units?