Free Eureka Fluid Film Samples

[Michael J. Donovan]

Fluid Film is the answer to control equipment corrosion in the Lawn & Garden and Agriculture industries. Its unique woolwax (lanolin) formula is completely solvent free. Fluid Film protects all metals by creating a non-drying barrier that moisture cannot penetrate. Always active and tack-free, Fluid Film provides long-lasting lubrication for moving parts.



Fluid Film stops deterioration on contact. It will not harm paint, plastic or rubber and resists water wash-off, making it ideal for protecting equipment stored indoors or out. Fluid Film does not freeze, inhibits buildup of snow and ice and will not burn greenery when used on trimmers and cutting devices.

If you have not yet tried Fluid Film and you reside within the Continental United States, write for a free can to discover why Fluid Film has proven so effective for fertilizer and salt spreaders, mower underdecks, battery terminals, hedge trimmers, and numerous other applications.



Visit their forum and write to Dan at dwilliams@eurekafluidfilm.com for your free can. If you’ve tried Fluid Film, please let us know what you think of our product. We’re always interested in hearing what customers have to say.

[Dano50]

If you'd like to visit our website, here is our web address: www.eurekafluidfilm.com.

Fluid Film will outlast and outperform any competitive product. With no solvent content Fluid Film will not evaporate, meaning a much higher solid content than other similar products. Most other similar products contain between seventy and ninety percent solvent, so most of what you spray on just evaporates and contaminates the atmosphere.

There is a reason why we are the leaders in corrosion control. If you haven't tried Fluid Film now is the time to take advantage of this free offer. The only thing you have to lose is rust.

[jmkr02]

Works Great I use it on my Drilll Press and Table Saw for when I'm not using them much along with the shafts on my hydraulic cylinders and other metal parts that I want protecting. When I strip down engine parts I spary them before I put them away in Storage.

[ClayMcC]

When I read this thread I opened my eMail client to send an eMail requesting a free can... but then things got stupid. I couldn't think of a "thing" to say. Ask for a free can, and then provide my address? Easier said then done. Here are some examples:

"Dear Eureka Chemical Company,
Please send me one free can of "Fluid Film" as per noted on the website, Lawnsite.com."

"Dear Fluid Film,
I saw a thing on the net which said I could have a free can. Send me one."

"Hello,
Can I have some? I could use it. Is it like grease?"

----------------------------

Not to lecture you all, at all, but couldn't you give us a Free Offer Trial Number with a reference or a coupon link or something? I just spent ten minutes trying to ask for a free can, but didn't know what to say.

[Dano50]

The problem with offering a telephone number is that our phone lines would be jammed up with people asking for samples and then we'd have to write down all their shipping information anway.
The beauty of the email is that all the information is right there. If you'd like a free sample, just shoot me (dwilliams@eurekafluidfilm.com) an email and write "FREE SAMPLE" in the subject bar. In the body just provide a shipping address and let me know you saw this offer through lawnsite and you're a new user.

BTW, if you wrote in last week requesting a can I am in the process of going through them right now. I tried to keep up on them but I was out on vacation and our email system was having all kinds of problems. We are switching providers as we speak, so while our email is now back up and running our website may be down for a day or two while the browser gets redirected.

Believe me, I came back to a mess and I'm going crazy. :dizzy:

Sorry for the inconvenience and look forward to hearing from you.

Dan

[BQLC]

Dan
I got the sample this morning. I was getting a bit let down because it had not shown up but it turns out that UPS left it at the neighbors.
I will spraying everything GREAT PRODUCT SO FAR!!
Thanks for giving me the opportunity to try your product

[Dano50]

Dan
I got the sample this morning. I was getting a bit let down because it had not shown up but it turns out that UPS left it at the neighbors.
I will spraying everything GREAT PRODUCT SO FAR!!
Thanks for giving me the opportunity to try your product

I'm glad you finally got it and I appreciate your feedback! It gets frustrating when I know I shipped it out and it never arrives.

[djsp24]

Thanks Dano!
Awesome product, spraying it on everything! Appreciate the free sample and am very satisfied with the product so far. Thanks again!

[Dano50]

Thanks Dano!
Awesome product, spraying it on everything! Appreciate the free sample and am very satisfied with the product so far. Thanks again!

You're welcome and I'm glad to hear it's working for you!!

[Grass Kickin]

I got a can promptly, thank you very much. I will report my experiences with it ASAP.

[Dano50]

I got a can promptly, thank you very much. I will report my experiences with it ASAP.

I'd appreciate the feedback. Thanks!

[MattsMowing3535]

I got my fluid film yesterday and plan on testing it out on soem sheet metal today! I will set out some plan sanded sheetmetal with fluid film and some without. I think I will make a thread and post my pictures to show just how well it works! Probly take pictures everyday to show progress

[Dano50]

I got my fluid film yesterday and plan on testing it out on soem sheet metal today! I will set out some plan sanded sheetmetal with fluid film and some without. I think I will make a thread and post my pictures to show just how well it works! Probly take pictures everyday to show progress

That's something I'd love to see. Thanks for putting it to the test.

[MattsMowing3535]

Hello Everyone!
I have decided that I will start my testing of fluid film! Lets hope that the test results show that it really can keep metal clean and rust free for a long time! On the left you will see a sheet of metal (This is the one with fluid film on it) On the right you will also see a sheet of metal (This has nothing it is just stock metal). I will try to take a picture everynight and include the time! I would like to add that both metals came from the same plant, are the same sheet just cut in two and have no diffrences. I did shiny each metal to the point that there was very little surface rust. The fluid film sample does have some left. We will see how it takes care of it. I will also type all of the events as they happen. (I.E. rust forming etc!)
Thanks everyone and prepare to be amazed!
Matt-

Also, I was thinking about putting a small pile of salt. And a small area with water on them. Maybe fertilizer too I donno. But this would really show how fast the other sheet metal can rust away while Fluid Film keeps it under control! Please tell me what you think of this idea!

[Valerie36]

Can I have a free sample too?

V

[MattsMowing3535]

Mods I just relized that I really should have put this in the Fluid Film part of these forums! If you could move it to a thread there that would be great! Thanks!
If not I can try to redo it over there just not sure how to move it all ;)

[Beau Rivage]

Still waiting.:confused:

[Dano50]

Still waiting.:confused:

Uh oh :hammerhead: It happened again!

PM me and we'll get it worked out.

[Dano50]

Can I have a free sample too?

V

Valerie, I'm sorry if I didn't respond earlier. Of course you can get a free can! Just email (dwilliams@eurekafluidfilm.com) me and I'll get one right out to you.

[casco73]

I just em-ed you for a free sample. What Is the cost for a can usually cost??

[Dano50]

Step right up and get your free sample can of Fluid Film (http://www.eurekafluidfilm.com)! If you live within the Continental United States and have never tried the best corrosion preventive and lubricant on the market, I have no idea what you are waiting for!

Fluid Film consists of a wool-wax base, contains no solvents, and is an eco-friendly product. It will outperform any competitive product, stopping and preventing rust on all metals, lubricating for extended periods of time and helping to keep grass from clumping under mower decks.

Try a can today on us and discover why Fluid Film is the Worldwide standard in corrosion protection. Made in the U.S.A. :usflag:

[grandview (2006)]

I was looking at Mowpart site do they have a S&H fee?

[Dano50]

I was looking at Mowpart site do they have a S&H fee?

Yes they do. Once you put in your zip code the shipping charges come up.

[tamadrummer]

Got my free sample can a couple of weeks ago. (Thanks so much!!:cool2: )

Bought my first can today, 11/15/07 at my local John Deere dealer. Cant beat the stuff, we used it in the Navy in the Boiler room back in the early 90s and I completely forgot about the stuff.

I won't be without it again!!!

[Dano50]

We've still got 'em for LawnSite.com members who have never tried it and live within the Continental United States. Just PM me for a free sample! Once you've tried it and can't live without it, buy a can, post a pic using it on your equipment, and we'll ship you out a free hat or T-Shirt!

Can't beat that deal...:cool2:

[Supper Grassy]

Fluid Film is GREAT

[sierra1]

After reading the info on the website, I ordered a case of 12 large aerosol cans of Fluid Film. And only THEN did I e-mail for my free sample. The specs, info, and testimonials on the website, and here on Lawnsite convinced me!

I'm not an LCO, but have an 80-acre farm in Northern MN, with a JD 2520 tractor, 200CX front-end loader, 5' brush mower, 5' back blade, seeder spreader, and... a JD 820A ZTR w/ 54" MOD deck. That, coupled with all the other tools needed for running a small farm should give me plenty of uses for Fluid Film.

Oh, and although this is my first post on Lawnsite, I have gleaned a tremendous amount of valuable and useful info from the professionals here on the site - THANKS!!!! :waving:

S1

[Woody_1]

We've still got 'em for LawnSite.com members who have never tried it and live within the Continental United States. Just PM me for a free sample! Once you've tried it and can't live without it, buy a can, post a pic using it on your equipment, and we'll ship you out a free hat or T-Shirt!

Can't beat that deal...:cool2:


I'm a moron, and can't figure out how to send you a PM. Maybe I haven't been on the site long enough or something?

[Dano50]

I'm a moron, and can't figure out how to send you a PM. Maybe I haven't been on the site long enough or something?

You need 10 posts in order to send a PM. Once you get to ten, just shoot me a PM and I'll take care of you. :)

[Woody_1]

OK I'll post a few more

[Woody_1]

You need 10 posts in order to send a PM. Once you get to ten, just shoot me a PM and I'll take care of you. :)

I'm up to 11 now, and still can't do a PM yet. I'll keep trying.

[Dano50]

I'm up to 11 now, and still can't do a PM yet. I'll keep trying.

Woody, just send your info here (dwilliams@eurekafluidfilm.com), and I'll take care of it.

[JoyofFluidFilm]

We still have more samples of FLUID FILM!!!

Fluid Film differs from other lubricants in that it doesn't contain any solvents and the lubricating capability remains for extended periods of time and is not subject to evaporation!

PM me if you'd like to try it and i will send you out a sample can for free !

Yippee...

[Woody_1]

I just coated the inside of my new Honda snowblower with Fluid Film!

[MOWPART_SCOTT]

I have used br*aso, sa*bian cymbal cleaner evrything under the sun! to clean tarnished finger printed up Cymbals.... I know this isn't a landscaping issue BUT! for you landscapers who play drums like Tamadrummer that I see in here. SPRAY FLUID FILM ON YOUR CYMBALS!!! you wont believe what you will see! It takes it right back down to the brass with no scrubbing and it will not effect the lettering at all! spray it on let it sit til it stops bubbling and wipe it of with a grease rag!. spray it on your Kick pedal chains. But DON'T! I REPEAT DO NOT spray it on the drum it self! It wont hurt em at all but sure is a PITA to clean off the finish! OH yeah and Guitar strings! spray it in a rag and pull new strings through the rag to coat the string then put them on the guitar! Strings will last 3 times longer.... no rusting! NO BS!
Dano... there is definitely a market in the music industry for Fluid film! you may wanna check that out!:)

[Dano50]

Wow, very cool. I will have to look into it. That's a heck of a testimonial!

Thanks!

[DUSTYCEDAR]

i love the stuff thanks for the swag bag

[JoyofFluidFilm]

swag bag? what's that?

[nbenallo33]

Joy,
Dan said i cant sucker you out of another free can!

[JoyofFluidFilm]

yup thats true. only one sample can per person. ;)

[JoyofFluidFilm]

If any of you have sent out sample requests to me or dano50 and you've not received it , yet, please contact us.

Thanks alot

[Lawn Tech LLC]

I just emailed you not sure if it went through. I would like to try a can.

Bill Houck
Lawn Tech LLC
314-280-6906

[JoyofFluidFilm]

If you haven't received a sample can of Fluid Film and are interested in seeing how it can benefit you in preventing further rust and corrosion, please pm me or Dano50 for a sample can.

Fluid Film is the ultimate rust and corrosion preventive. It doesn't harm paint, plastic or rubber, doesn't burn greenery, and is environmentally safe.

[JoyofFluidFilm]

Hi Lawntech, i sent you a message

[Dano50]

We are offering free Fluid Film samples to any Lawnsite member who hasn't tried it and lives in the US. If you are interested, just PM me your name and address. We should be getting a new shipment in a few weeks and I'll put you on the list.

:cool2:

[tamadrummer]

You would have to be crazy not to take advantage of this offer.

Do you have any sales kits for dealerships? I gave my little sample and papers to my mower dealer but would like to be able to give him a few little cans to give out to other landscpers so that they would stock and sell it.

Our local JD dealer shut down and there is no where close to get FF.

I order from Hoyt but my dealer would probably sell it by the case if it was available.

[Dano50]

You would have to be crazy not to take advantage of this offer.

Do you have any sales kits for dealerships? I gave my little sample and papers to my mower dealer but would like to be able to give him a few little cans to give out to other landscpers so that they would stock and sell it.

Our local JD dealer shut down and there is no where close to get FF.

I order from Hoyt but my dealer would probably sell it by the case if it was available.

Absolutely. PM me his information and I will send him some samples and flyers. We'd love to pick him up.

[tamadrummer]

Hey Dano, I sent you the PM

[JoyofFluidFilm]

if you people are still interested in receiving a sample can of fluid film, please pm me. thanks

[lubelizard]

Interested in trying out a can, but it doesn't look like I can PM yet.

[Dano50]

Start posting and soon you will be able to. I think it's ten posts and ten days of membership before the PM's kick in. Not exactly sure, though.

[JoyofFluidFilm]

Fluid Film will outlast and outperform any competitive product. :clapping:With no solvent content Fluid Film will not evaporate, meaning a much higher solid content than other similar products. Most other similar products contain between seventy and ninety percent solvent, so most of what you spray on just evaporates and contaminates the atmosphere.

There is a reason why we are the leaders in corrosion control. :weightlifter:If you haven't tried Fluid Film now is the time to take advantage of this free offer. The only thing you have to lose is rust.

so pm me today for a free sample!!!!
visit our website at www.fluid-film.com
We also have a fan page at www.fluid-film.ning.com
__________________

[User Name Taken]

I'd like to try it. If it works I'll stock up for sure. I have plant beds behind my house so I can't spray my clover till june most years. I mow twice a week and have to clean out from under my deck once a week because it starts leaving blades of grass.

[DLAWNS]

I'd like to try it. If it works I'll stock up for sure. I have plant beds behind my house so I can't spray my clover till june most years. I mow twice a week and have to clean out from under my deck once a week because it starts leaving blades of grass.

Just private message Dano50 or joyoffluidfilm to get your free sample!

[User Name Taken]

That was my 10th post and I don't see an option for PM when I tap his username. It may take 24hrs to update my acct. so I'll be in touch. Thanks Bill!

[User Name Taken]

What's the issue with the website ?

[DLAWNS]

What's the issue with the website ?

It should be working now....I clicked your username and it gave me an option for private messaging you so you should be good to go...

[User Name Taken]

Thanks Bill

[User Name Taken]

FF worked wonders for me. The build up under the deck could not fill up my hand! Before it would almost completely clog the far left blade and most of the middle. I bought a can at the local JD dealer to finish my deck .
How often do I need to reapply ? ,I'll definitely be getting a case on the way now.

[DLAWNS]

FF worked wonders for me. The build up under the deck could not fill up my hand! Before it would almost completely clog the far left blade and most of the middle. I bought a can at the local JD dealer to finish my deck .
How often do I need to reapply ? ,I'll definitely be getting a case on the way now.

It really depends on how much you cut, but I give a light coating once a week. Sometimes I go a bit longer, but I try to do it once a week.

[User Name Taken]

all i cut is my own @ 1 acre so ?

[DLAWNS]

all i cut is my own @ 1 acre so ?

I guess I would say once a month. But to be sure just check the deck, when you start getting some buildup, hit it again. Then you'll be able to gauge how long between applications. Wetness of turf will also play a part in making it necessary for an application sooner.

[JoyofFluidFilm]

We are still giving away free samples of Fluid Film, so if you have NEVER tried this awesome stuff, now's your chance to see what all the hype is about. Message me or Dano50, and we will send out a can in no time! Have a happy fluid film day!

[User Name Taken]

I love this stuff. I'm about to paint my deck and coat it for the winter along with my plugger and next week plan to undercoat the truck with it !

[SKYNYRD]

I love this stuff. I'm about to paint my deck and coat it for the winter along with my plugger and next week plan to undercoat the truck with it !

ff works great on wood but i wouldn't recommend using it on any area of the deck you walk on. that's just an accident waiting to happen

[User Name Taken]

Guess I should have specified the underside of my z-turn deck , lol

[Lefet]

ff works great on wood but i wouldn't recommend using it on any area of the deck you walk on. that's just an accident waiting to happen

Great advice! I'm still looking for additional places to use it!

[JoyofFluidFilm]

you can find more great applications on our website at www.fluid-film.com:waving:

[Lefet]

Thanks Joy, I'll take a look. I think I did see one about a boat... but that's a ways off!

[Lefet]

Hey General, when do I get my orders????

[SKYNYRD]

Guess I should have specified the underside of my z-turn deck , lol

i figured it was a mower deck but wanted to clarify for anyone not thinking that way, we try to keep the disclaimers to a minimum :laugh:

[SKYNYRD]

Hey General, when do I get my orders????

i'll discuss it with the commander the next time we speak and see what he has to say on the matter. typically the newer recruits have to spend time answering to the princess and doing things like holding her purse while she shops for shoes:laugh::laugh:

[Lefet]

aaaaaaahhhhhhhhh much like KP!!

[Dano50]

It's a hazing ritual we are not proud of, lol.

Welcome to the ranks, soldier!

[Lefet]

Thanks Commander!

[JoyofFluidFilm]

Woohoo, we are definitely increasing our Fluid Film army...wow:usflag: that is too cool:cool2:

[SKYNYRD]

joy.... shouldn't u have been sleeping when you posted that;)

[User Name Taken]

Undercoated the truck yesterday. Took about 2 1/2 cans. Funny how much corrosion has started on a 2006 truck w/ 64k on it.

[User Name Taken]

So on the fluid film world I see where we have something like the WD40 cap now ?

[User Name Taken]

Scratch that

[crasmith]

I just ordered a few cans but it did not have the new straw attached. Are these out yet? :)

[Dano50]

Yes they are. PM sent.

[crasmith]

Yes they are. PM sent.


Got PM. Thanks Dan! :)

[Dano50]

FLUID FILM (http://www.fluid-film.com) stops corrosion on contact caused by fertilizers, salts and moisture. It lubricates for extended periods of time because it contains no solvents, will not get tacky, and will not dry out. It will also not burn greenery on cutting devices.

If you haven't tried it and live in the US, just PM me your contact info and I'll get a sample can right out.

[ecurbthims]

Dano ,I live in Canada ,how do I get a trial can of this stuff or where can I buy it up here ?

[Dano50]

For a complete list of dealers in Canada you can check out our Canadian distributors website: www.nlsproducts.ca

[Dano50]

If you haven't tried Fluid Film yet and live in the US, just PM me for a free sample can. We even pay for shipping.