PDA

View Full Version : New Husqvarna ZTR woes, please advise


kenny6425
06-13-2006, 07:15 PM
Good day all. I have a small brand new commercial Husqvarna 48" 19 horse Kawi. that is only 1 month old with under 100 hrs on it. Thus far, right Parker Hydro has been replaced and now since getting it back it has popped a cellenoid. Replaced the cellenoid and it started fine for about (4) hours and then click nothing. Needless to say I jump it with a flat tip screwdriver and it starts fine. I have no idea why it is frying cellenoids, it started perfectly until I got the hydro replaced. Also, how do I adjust the steering arms so they are equal in pressure, or will they be unequal because of the new hydro pump. Any help would be greatly appreciated. Thank you.

Restrorob
06-13-2006, 08:11 PM
Take the unit back to your dealer and have them fix it right, Finding the problem with the solenoids and adjust the tracking as they should have done after replacing the hydro.
That unit is too new for you to have to be working on yourself.