PDA

View Full Version : new cub cadet zforce 60 jerking


swsmith72
06-19-2006, 08:17 PM
Hello, I just had a new cub zforce 60 w/ 23hp kaw delivered today and it is very jerky at first but goes away at full speed and also has a tracking problem but that is in the manual. I bought from a retail store that does not do adjustments prior to delivery. I am thinking that everything will be fine with some adjustments but I'm not sure where to start. Also this is my first zero turn. Any suggestions would greatly be appreciated.
thanks
sean smith
webster, fl

lawnmaniac883
06-19-2006, 08:31 PM
You say very jerky, how so? If when you are cruising at 1/4 or 1/2 stick the thing is bucking or is it only on take-off?

swsmith72
06-19-2006, 08:35 PM
I would say at take off its bucking and as I give it more stick it goes away

Restrorob
06-19-2006, 09:01 PM
Take it back to the store and get another. You shouldn't have to be working on a brand new unit. The local stores around here pays us to set up units that the customers complain about.

khouse
06-20-2006, 08:33 AM
if it's your first lever machine then i think your just not used to it yet. get some more hours on it and you may find it steers fine.

dcondon
06-20-2006, 10:38 PM
if it's your first lever machine then i think your just not used to it yet. get some more hours on it and you may find it steers fine.

Just what I was thinking. Give it some time and see how it feels.