Walker Mower Model t Muffler

[lawnandland]

I can't seem to find a Walker Mower Model t Muffler. It is the kind that drops down to the lower part of the engine. It's the flat type, most common I suppose. anyone have any websites in mind for a muffler. Tulsa and small engine wrhse don't seem to have it. Please help. PS, my local dealer cannot get it anymore??????Really???? need a photo, I can supply. thanks all !!

[RedWolf]

post a pic of what you have and i may have one or two i could send you

[tomo]

Hello, sounds like the oval type eg[seperate engine pipes] [look from the end ][stainless steel guard]. Later muffs r round with the engine pipes part of the muffler.
Due to the very thin steel and ones that fail under warranty splits etc mainly around guard mounts and inlet tubes i had a stainless dual layered with heat wrap betweenlayers made up . Available at a custom exhaust manufacturer, they will need a sample. tomo

[AAELI]

P/N 8013 has been replaced with a newer design to eliminate/reduce the typical 'backfire' when shutting off the engine. The replacement kit is easy to install and seems a bit more durable.

Any particular reason you want the older style instead of the new and improved?

I believe the older one was retailing somewhere around $95.

[lawnandland]

Thanks for the replys guys. I have attached 2 pictures of the muffler. If there is a new and better updated muffler for the kohler ch20hp, please let me know the type, or if possible, the model #. I would rather not deal with my walker dealer, as they just seem to busy to deal with that? HERE ARE THE PHOTOS BELOW, Thanks again !!!

[lawnandland]

Here Are The Photos, Sorry!

[fixer67]

Send me an email address that I can send you some infor. Lawnsite say you can not receive IMs at this time.

[lawnandland]

Send me an email address that I can send you some infor. Lawnsite say you can not receive IMs at this time.
lanncz6@comcast.net