PDA

View Full Version : Mitered corners


forestfireguy
09-05-2006, 08:29 PM
When cutting cap and pavers how do you measure for mitered corners, currently I lay one paver/cap over another and mark the cut is there another way or maybe a tool for this purpose?

Mike33
09-05-2006, 09:56 PM
are you talking total pavers or caps on srw. I have no experience with pavers is why i asked.
Mike

YardPro
09-06-2006, 08:33 PM
i use an angle gauge from lowes. i lay the blocks so the they touch on the close end. I then lay the gague on the back of the cap and measure the angle. I then divide by 2 and cut that amount off each block.