New Truck Woes!

[rutwad]

Well, I finally got my new Chevy 3500 cab & chassis. I had a flatbed installed, but the flatbed came with 2 red lights and 1 clear on each side. The chevy is set up for 1 amber, 1 red, 1 clear. So now my bed is wired wrong and I have to go figure it out. Mash the brakes, and all the turn signals stay on. Guess I had better get started tracing it out.

[Gravel Rat]

Its easy to make your lights work I don't know what type of lights you are using are they Grote or Truck Lite ?

What you need is lights that are stop,tail and turn I assume your lights are the wrong ones.

You just need to pull the plugs out of the back of the current lites and take a test light to see which wire is what.

[rutwad]

After a few cuts, splices, and new wires I got it fixed. :)

[climber]

Got any pics of it!:)

Dan

[rutwad]

Got any pics of it!:)

Dan

I think there are a couple of pics in the camera. I'll have to check and see.

[grass disaster]

any pics yet?

[rutwad]

any pics yet?

Not yet. Once I get them, how do I post them here. I tried posting pics on another site and they are usually too large.

thanks

[grass disaster]

put them in paint first then stretch/sque them and reduce them