Husky edger vibrating!!

[gogetter]

Just received my new Husky stick edger (model ex350, I think?). Starts fine and all, but REALLY vibrates alot until I squeeze the trigger then smoothes right out.
Normal? Never owned Husky equipment before.
Thanks.

[sdwally]

You should check back with the dealer to be sure, this way it will be covered under warranty if there is a problem. You might try having the dealer start another new one to see if it does the same thing. Sorry I could not be of more help. We only have Husky chainsaws and 2 blowers.

[TJLC]

I had a similar vibration problem on my Echo. I figured out that the blade was bent. I flipped it over and it seems to have cured the vibration. Hope this helps.

[gogetter]

Can't take it back to the dealer. Well, probably not for free. It was one of those e-bay deals.
But I'll check the blade.
Thanks.

[Island Lawn]

Changing the blade has solved vibration problems for me in the past.

[gogetter]

Just dawned on me. It can't be the blade because it vibrates at idle. The blade doesn't turn at idle. As soon as I squeeze the trigger, the blade goes and the vibrating stops.
I'll take it to a local shop. Thanks for the input though.

[SMB]

2 cycle engines do not run well at low RPMs. It may just be running rough at a very slow idle. My Shindy T270 vibrates at idle.