PDA

View Full Version : Lazer Stalling


cgreen454
09-15-2006, 08:52 AM
For the past week, the Lazer has been hurting when the throttle goes below half. Symptoms:

When the engine is cold, any thottle below half, and she stalls.

On the first start of the day, engaging the blades always kills the engine 3 or 4 times, no matter what the throttle is set to.

After the first start of the blades, and everything heats up nicely, engaging the blades at anything below 1/2 throttle kills the engine.

After searching the board, I've found similar problems when the engine is hot, but not cold, or even cool for that matter.

Ideas?