PDA

View Full Version : Exmark lazer won't start


Teasip
06-07-2001, 04:48 PM
Exmark Lazer won't start. I bought it used a couple of months ago and it has run great. Went out to start it a few days ago and it won't start. Turn the key and get a click in the back of the engine. The levers are out, the brake is on, I'm sitting in the seat. Replaced the battery but that's not the problem as well. Can pull the PTO out and turn the key and hear another click so I know it's getting juice and contact in the back. Would like to hear from you guys before I wind up spending lots of money on the dealer. Thanks a bunch for your help.

eXmark
06-07-2001, 05:30 PM
Call our Customer Care Department ASAP at (800) 667-5296 so they can get you figured out. Be sure to have your model # and serial number in-hand. Going to be tough to do via e-mail.

You can also post your:

Name
Phone Number
Serial Number
Best time to reach you

And someone will get back to you.....

Your best, quickest response on this will be via the 800# above

Thanks

Exmark