FIRESCOOBY
09-25-2006, 08:58 PM
Here is one of my nicer Fescue yards (most are Bermuda). This was cut @3" per owners request. Had been cutting it at 3.25-3.5". Mower is 2005 Hustler Mini-Z, 52"/19hp Kawasaki with fusion blades.
First pic is of my "striper". I took a mudflap and doubled it up. Attached it with 1/4" screws with band of metal on top. I drilled two holes in rear engine cover and placed hitch pins in them. Then drilled holes in "striper". Takes about 10 seconds to attach striper, 5 to remove. Can't keep it on because it will get caught under rear scalp wheels when backing off trailer.
"Striper":
http://i96.photobucket.com/albums/l172/Premierlawn/DSC00954.jpg
Stripes:
http://i96.photobucket.com/albums/l172/Premierlawn/DSC00953.jpg
More stripes:
http://i96.photobucket.com/albums/l172/Premierlawn/DSC00952.jpg
One more:
http://i96.photobucket.com/albums/l172/Premierlawn/DSC00947.jpg
First pic is of my "striper". I took a mudflap and doubled it up. Attached it with 1/4" screws with band of metal on top. I drilled two holes in rear engine cover and placed hitch pins in them. Then drilled holes in "striper". Takes about 10 seconds to attach striper, 5 to remove. Can't keep it on because it will get caught under rear scalp wheels when backing off trailer.
"Striper":
http://i96.photobucket.com/albums/l172/Premierlawn/DSC00954.jpg
Stripes:
http://i96.photobucket.com/albums/l172/Premierlawn/DSC00953.jpg
More stripes:
http://i96.photobucket.com/albums/l172/Premierlawn/DSC00952.jpg
One more:
http://i96.photobucket.com/albums/l172/Premierlawn/DSC00947.jpg