PDA

View Full Version : 3 inch over 2.5


Downunder Bob
11-26-2006, 11:59 AM
Hey PJ, is blade part number 781898 still available?
I prefer the 3 inch blade over the 2.5 inch.
This is on a 52.
Cheers, Rob.

mowerconsultant
11-27-2006, 08:08 AM
Hey PJ, is blade part number 781898 still available?
I prefer the 3 inch blade over the 2.5 inch.
This is on a 52.
Cheers, Rob.

It is still available (in the U.S.), but it is a older style offset blade design, not a Fusion blade.
Double check with your dealer and have them check with the distributor to check and see if they stock it and or will import it in for you.
If you have a newer 52" deck you shouldn't run a offset blade, it will put the edge of the blade below the front lip of the deck.

Pj

Downunder Bob
11-27-2006, 12:22 PM
So does that mean their are no flat, fusion, 3 inch blades available for a 52?

mowerconsultant
11-29-2006, 10:22 AM
I don't believe the Fusion's are 3 inches wide, so no 3" wide Flat blades.