View Full Version : I need some pics of trailer racks
12-01-2006, 04:53 PM
Im going to build/weld some custom racks for all of our equipment and i was hoping you guys could post some detailed pics of your equip racks.
I just built some trimmer racks for my new trailer, I will post pictures tomorrow.
12-03-2006, 02:58 PM
Dont have any pics of my trailer yet, but I just have a set of green touch 3 place trimmer racks.
btw I know that the trailer needs a new floor. It's my winter project.
12-05-2006, 11:37 AM
thanks for the help so far fellas, more pictures would be appriciated as well,
12-14-2006, 01:09 PM
anybody got more pics? i would like to start fabbing up the racks this week since it is warm here in ohio. i could use a few more pics for some ideas
12-15-2006, 07:53 PM
Here are 2 pics of a rack I built. It works flawlessly. Pm me if you have any questions.
01-23-2007, 11:24 PM
in the last pics; is that just a spring loaded bolt? Great idea!...just push and load. have you guys made any other racks on these trailers for blowers, cans, etc?
01-24-2007, 11:06 PM
i am building some now and will post pics later
01-24-2007, 11:45 PM
I get so sick of seeing ghetto a$$ trimmer racks. just pony up the $125 for one that is already made.
If you have any triple crown dealers in your area, I highly recommend picking up this rack...
01-27-2007, 11:51 PM
IMO that display rack looks cheap; like the surfboard bottle openers they sell in Fla. (no offense you live in florida; just coincidence)
If that is $125 I'd much rather have custom angle iron (what the trailer frame was made with) and painted to match. Looks built from the trailer factory.
Ghetto would be sticking a 2x4 board or two on a trailer and using bungee cords to hold it all together. The guys that have taken time to post their custom work are both secured in different yet effective ways. The display rack above could be kicked off with one good kick and the whole thing carried off. Weld it and forget it.
01-28-2007, 01:20 AM
:waving: Ribbie, I was wondering if you ended up building racks or just buying prebuilt ones?
01-28-2007, 02:08 PM
The display rack above could be kicked off with one good kick and the whole thing carried off. Weld it and forget it.
Good luck kicking it off. The bottom piece is angle and yes it is welded to the side of the trailer, or in my case it is bolted to the wall inside my trailer.
01-30-2007, 11:38 AM
Thanks for posting stuff fellas. I think im going to go with custom fabbed racks because i get dibbs in the metal scrap bin at my friend's dad's factory, and they have a ton of angle iron. so i should be able to make something with that and my mig welder.
keep the pics coming
vBulletin® v3.8.6, Copyright ©2000-2013, Jelsoft Enterprises Ltd.