View Full Version : replacing blades on 60 hustler z
06-30-2001, 11:55 PM
what's the easiest way to replace the blades on the 60" hustler z?
07-02-2001, 09:50 AM
I am assuming you are referring to the need to get under the deck to get at the blades in order to change them. There are several ways in which to do this - a hoist being the most efficient. Realizing that most of us do not have access to a hoist a couple car ramps work nicely. Put the deck all the way up, drive up on the ramps, and set the brake (integrated into the steering levers) and have at 'em. If you have any other questions call us at 1-800-395-4757 and ask for customer service.
05-11-2008, 11:55 PM
the way I do it is by using a car jack ....
to jack up the front of the mower and then put a slot jack on each side of the deck .
You have to get the front of the mower way up in order to have room to get an impact wrench in there, but it works like a charm.
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.