View Full Version : Would a 48 inch Lesco fit in an Astro van?
02-09-2007, 10:59 PM
I know the width is there, but the height??? I have my truck in the shop and want to pick up a WB lesco 48...all i have is a van! im thinking it wont fit due to height restrictions...
02-09-2007, 11:01 PM
id take a guess that its 3 feet at the handle bars?
02-09-2007, 11:05 PM
i dunno...i'd guess i have about that much room in the astro....gotta be at least 3 ft right...if u sit in a seat and dont hit the roof (to cold to go measure!!)
02-09-2007, 11:20 PM
i was thinking the same! too cold! sorry i couldnt be more of a help!
02-09-2007, 11:23 PM
the more i think about it here in my warm den, i think hthe bars on th lesco must be higher than 3 ft, prolly 3.5 at least.... idont think it'll fly, but we shall see
02-10-2007, 07:00 PM
I used to put a snowblower into an astro van. A 27", 10.5 HP snow blower. I could put it in either door actually, side and back.
I have an astro van sitting in my driveway...it's selling in about 30 minutes...i'lll measure the rear opening and let you know before I sell it...i'll be righr back.
Mine is 44 inches high X 52 inches wide. I used to put all my standard 21in mowers in there with no problem. Let me measure my scag real quick and see if the height would work...hold on
My Scag 32 in walk behind- the highest part of the handles is 41.5 inches. I think, theoretically, my scag would fit in there from a height standpoint. Don't know about the width of the the 48 incher. Do not buy that thing based on my post though. So let me say, my 89 Chevy Astrovan rear opening is 44 high X 52 wide. My scag is 41.5 inches high at it's tallest point. Hope that helps. Ben
02-10-2007, 08:08 PM
My astro had wheel wells inside, I don't think they would have been 4 ft. apart
vBulletin® v3.8.6, Copyright ©2000-2015, Jelsoft Enterprises Ltd.