Pull behind Aerator

[Armadillolawncare]

Can anyone recomend a good aerator I could pull behind my small Z?

[DuraCutter]

Can anyone recomend a good aerator I could pull behind my small Z?

Bluebird pull behind aerator. It weighs around 500 lbs with weights. Good quality.

[Swampy]

Lesco makes a pretty good one. Just need a couple of sand bags and go.

[Accu-cut Lawn Care]

Can anyone recomend a good aerator I could pull behind my small Z?

I would definitely recommend an aerator from fabworks oem. They make the perfect one for your small z. It is water filled; so you can add and subtract weight as needed. Also, it has staggered tines so your z will have an easy turning it. I think they go for around 400. Call Brad, the owner and he'll give you a good deal...423-462-5815

[LindblomRJ]

I would definitely recommend an aerator from fabworks oem. They make the perfect one for your small z. It is water filled; so you can add and subtract weight as needed. Also, it has staggered tines so your z will have an easy turning it. I think they go for around 400. Call Brad, the owner and he'll give you a good deal...423-462-5815

Looking at their website they don't have an aerator listed. Is it a custom built deal?

[Accu-cut Lawn Care]

Looking at their website they don't have an aerator listed. Is it a custom built deal?

No, it's not custom. He's begun selling them to distibutors mostly; but he'll have that info up soon. I'm glad I'm in good with this guy. In a week or two, he's gonna make me a custom 60" unit. I've seen and tested his 48 inch model and it worked great.

[MStine315]

I use, and like, my 60" Lesco. Classen is the same unit. I can put 150 lbs. on it and still pull it with my Turf Tracker (a twin to a 20 hp. Dixie). It has a split shaft so it makes turning easier.

[Armadillolawncare]

I'll look into these. Thanks for the help

[haybaler]

so how do you get it on and off the trailer? does it have wheels and some sort of lift system? is it good for small areas?

[LindblomRJ]

No, it's not custom. He's begun selling them to distibutors mostly; but he'll have that info up soon. I'm glad I'm in good with this guy. In a week or two, he's gonna make me a custom 60" unit. I've seen and tested his 48 inch model and it worked great.

What was the price of the 48, if you don't mind.

[Accu-cut Lawn Care]

so how do you get it on and off the trailer? does it have wheels and some sort of lift system? is it good for small areas?

They actually are very easy to move around. There is a set of wheels mounted to the top of it. So, all you have to do is unhitch it; then flip it over onto it's wheels.

[Accu-cut Lawn Care]

What was the price of the 48, if you don't mind.

I think it's about $450 if you buy it straight from him. The dealers around town sell them for 500. Tell him that Ryan sent you and he'll give you a good deal. His name is Brad Lane of Fabworks oem...423-462-5815. Call him anytime. Leave a message if he doesn't answer and he'll get right back to you.

[LindblomRJ]

Thanks.

I was thinking hey wait I am a Ryan. That might get confusing.:laugh: