New Hampshire

[jsaunders]

Shawn, if you buy something from joel make sure you tell him to "clean" it first, all they crap I got from him looks like one of by kids got a hold of it and rolled it in dirt and mud:laugh: just kidda Joel, I got that dethacher on and works good, had to modify it a bit, but thanks again.

Well Scott, I hope there was some mud and dirt on the dethatcher that was outside for 3+ years. Maybe if you buy some of my GOOD stuff?:laugh::laugh:

Vt pm me your email and I will send pics- the mower comes with a sulky as well.
Joel

[A-Cut-ABOVE]

oh sure when im looking for a sulky no body has one....

[Dotens]

Ha Ha Hey ken did you see any jungle bunnies today at your place?

[A-Cut-ABOVE]

nope no bunnies here today. I did get my new spikes today tho.....

[jsaunders]

oh sure when im looking for a sulky no body has one....

I have a nice 2 wheel velky sulky Ken!

[VT MOWER]

I sent you a pm Joel with my email.
Thanks man

[A-Cut-ABOVE]

joel what do you want for it? and send me a pic... I need one for my scag..

[jsaunders]

Ken I have an orange velky sulky for $85 the arm has a couple of dents form being caught under the machine while backing off trailer- It is max 2 years old- I also have a black velky sulky that is $165 that is 3-4 months old.
I will send pics.
Joel

[jsaunders]

Ken - send me your email
Joel

[A-Cut-ABOVE]

joel you got a pm..

[VT MOWER]

I got your pm joel, thanks.
What year is the metro?

Good lookin machine!

[jsaunders]

VT- not quite sure of the year.
Ken- you have mail

[A-Cut-ABOVE]

joel u got mail..

[NHMTMN1]

Heading out to start sweeping my commercial properties, just got done loading the trailer and the weather is awesome. Its gonna be a nice day to make some money. Quick question...any one have any suggestions on a chemical company. I need my commercial properties sprayed, fert., lime, and pre emergent/weed control...got a bid from Chem-Lawn...any ideas?

[GreenMonster]

Heading out to start sweeping my commercial properties, just got done loading the trailer and the weather is awesome. Its gonna be a nice day to make some money. Quick question...any one have any suggestions on a chemical company. I need my commercial properties sprayed, fert., lime, and pre emergent/weed control...got a bid from Chem-Lawn...any ideas?

Erik Sweetster, www.iwantgreengrass.com

he does all of our apps

[A-Cut-ABOVE]

depends where are you located???? for the fert apps...

[N.H.BOY]

Holy crab-----bought a paddle broom this morning and did a cleanup:clapping: cant believe I been doing cleanups without one. money well spent. Redmax $519. Do you guys buy fins every year from wearing out?

[coastalscapes]

Holy crab-----bought a paddle broom this morning and did a cleanup:clapping: cant believe I been doing cleanups without one. money well spent. Redmax $519. Do you guys buy fins every year from wearing out?

Run it until they are all worn off! It will work just as well, even when they wear down quit a bit. Best investment next to a blower for cleanups!:drinkup:

[jsaunders]

Yes they are nice- but they will give you a good workout if you have to move alot of dirt. How the dethatcher working out?

[A-Cut-ABOVE]

I just picked up a 2nd powerbroom on friday, got it used from a rental place for 300 bucks. It was quite a deal......

[N.H.BOY]

I just picked up a 2nd powerbroom on friday, got it used from a rental place for 300 bucks. It was quite a deal......

300 bucks??????????????jacka**

[NHMTMN1]

I rented a sweepster walk behind power broom that thing was the nuts...you should see the sane it moves, Ive got a shindaiwa power broom and that thing does a great job getting the sand off the lawn areas.

[M&MLawn]

Do you guys know anyone in the area that does blown in mulch? I am wanting to see pricing to decide which way to go on a project.

Thank god the warmer weather is here!

[jsaunders]

I thought that you could get some of them for $250. NOT the redmax of course- maybe shindawa or Husky?

[A-Cut-ABOVE]

Do you guys know anyone in the area that does blown in mulch? I am wanting to see pricing to decide which way to go on a project.

Thank god the warmer weather is here!


I know a guy who just bought a blower. he said $135 an hour for it. I dont know what area you are in tho.

I think average price is 5-600 bucks for them no matter what kind it is...

[jsaunders]

I used a guy one season that charged $55 per yard installed. Did ok work, but wouldn't use him again.

[hotshot4819]

the sad part is i understand why they are charging to much for the mulch blowing.
need to realize they are using a 30-45 thousand dollar machine, along with another 30 k truck

[A-Cut-ABOVE]

oh no doubt, the macheniery is not cheap, but i dont like the way a machine applies it grinds it up to much for my likeing...

[N.H.BOY]

oh no doubt, the macheniery is not cheap, but i dont like the way a machine applies it grinds it up to much for my likeing...

KEN----what the hell are you doing posting a comment on here at 1:55 in the afternoon? dont you have cleanups to get done? or are your "helpers" doing them?

[coastalscapes]

The big company on the seacoast charges 65 per yard blown in. but you need to realize that it goes 3X as far as hand spread mulch and I know their machine was bucco bucks!

[A-Cut-ABOVE]

KEN----what the hell are you doing posting a comment on here at 1:55 in the afternoon? dont you have cleanups to get done? or are your "helpers" doing them?


I was in the office doing some paperwork, oh and checking lawnsite .
By the way I dont have helpers I have employees. They get paid to work so I dont have to....ha ha

[mtnzone]

New here just came on a couple of months ago... Good site.. and it is good to see some people from NH on here. Im in the Carroll county area. Started the lawncare/landscaping small time about 12 years ago to supplement the income, but the past two years it has become almost my primary source of income as I started a small outdoor retail business that is still on it infant legs.. ie.. more money going in than I'm taking out...lol

I started focusing my energies into this side and have seen it grow, but as with all of us.. I'm always willing to learn more, and to get more accounts.

Just took on my second commercial contract and maintain about 24 residential properties ( always looking for more) throughout the year from small flower gardens, lawncare, property management, mulching, restoration and winter plowing, any advice would be appreciated.. And if I can offer any I will sure try..

[VT MOWER]

Scotty, we use Shindiawa brooms with the city and haven't replaced fins in 3 years. Keep some spare clips handy though!

[N.H.BOY]

BILL (ground effects) did Jason call you? I gave him your number for some stuff... Nice work down there in Tilton at 5:30 in the morning today:clapping: I saw you runing the backpack and your guy was running the power broom:weightlifter: you getting too old for the broom?:laugh:

[A-Cut-ABOVE]

Scott , you calling other people old????? Hello pot , kettle here......
ha ha

[Ground Effects NH]

BILL (ground effects) did Jason call you? I gave him your number for some stuff... Nice work down there in Tilton at 5:30 in the morning today:clapping: I saw you runing the backpack and your guy was running the power broom:weightlifter: you getting too old for the broom?:laugh:

Yes, I did talk to Jason.
Been doing parking lots all weekend 4am-9am . Just finished up today. No he lost on the coin toss, so I had the blower and skid. :dancing:

[N.H.BOY]

Everyone done with spring cleanups?:laugh: Ive got about five more to do. Ken I might be needing your service soon to bring some mulch over to Gov. Island soon. You better have some and not used it all:nono:

[A-Cut-ABOVE]

Okay guys here is th new beast...

[A-Cut-ABOVE]

spring clean ups?? i just got started.... to many to do still,
Scott let me know what and when you need it...

[mtnzone]

no kidding I have about 12 more to do......

Nice truck...............dammm

[hotshot4819]

ken the only thing your missing is the logo's...

what happened to you sending me the design? my guy said he would get right on it.

hope your not going to buy a 40k truck and not spend a couple hundred on vynal lol

[hotshot4819]

your not turning into jason are you

[jsaunders]

Nice truck Ken- Maybe Jason can show you how to take GOOD pics:rolleyes:

Boy that front bumper is low- didn't know you had the plow on it already.:laugh:

[mtnzone]

...................................................................

[A-Cut-ABOVE]

Zach thanks for the reminder on the email....
I just picked it up yesterday give me some timewill ya... Also it was pouring rain out ill get some better pics for you guys to drool over when it stops...lol
Its parked facing down a hill, joel...smart a** But it looks low but i think sitting in it feels higher than my 2500 hd. it rides like a cadiliac and the d-max has plenty of power, and quiet... man i was at a set of lights today with a f450 next to me and all i could hear was his diesel over mine....Doten can attest to that he was sitting in the passanger seat.....

[A-Cut-ABOVE]

hotshot youve been emailed...

[N.H.BOY]

KEN---pretty sweet dude. Is that a roll tarp? Looks nice, now I know what your driving so I can throw my beer cans at ya NEW truck:laugh:

[A-Cut-ABOVE]

ya the tarp roll is built right into the head board nice set up. you knew what i was driving before and never threw beercans at me then....mabey is because you couldnt catch me.....

anyof you guys given any thought to the gettogether????

[mtnzone]

what get together?? is it a private club?? or you dont allow newbies to the site?? or even say hi......lol

[hotshot4819]

ken, The ford piston swapping cylinder sound is for us young guys, we understand the older gents need the chevy's.

is a sweet rig tho, wont deny that. dont make me post pics of mine lol.

[hotshot4819]

whenever you guys figure something out for a meet im am there...

[A-Cut-ABOVE]

hey mtnzone whats up..lol nope no private club, last yr we tried to get together and only a few showed up, but we had some fun (picking on kingsbury mostly) just trying to get some ideas going for a meet up fairly soon. any ideas?
Last yr we did it at my house in holderness, this yr nobody has made any suggestions. Ill do my house again but joel might complain about it being to far for him.
zach the slapping sound is nice if you dont want to hear yourself think....HA HA

[N.H.BOY]

Get together...we can have it at my house also. Need to get the horse shoe pit up and running, it doesnt matter to me either way, Im right off 93 at exit 19 easy in-easy out.

[A-Cut-ABOVE]

scott , we have heard that about you.. easy in and out....ha ha

scotts house is a little more central
all in favor???/

[jsaunders]

Exit 24 or exit 19 makes no difference to me:rolleyes: Exit 19 will save a couple of mins. Are our other halfs invited this time? Any dates yet? Let me know what needs to be brought.....WAIT I'll BRING THE CHIPS!:laugh::laugh::laugh::laugh:

Looks like we(I) will be mowing within 2 weeks.payup

[A-Cut-ABOVE]

with this rain I think we might start next week mowing,
Other 1/2s were welcome last time, didnt you say you didnt want your other 1/2 to go???? HA HA.. Im just kidding Joel's other 1/2.

[hotshot4819]

ken, i try not to think,, sometimes i scare myself,

however all i know is there are a few dodges out there that sound a hell of a lot louder then mine..

[A-Cut-ABOVE]

HEy guys just a heads up , we just bought an aerator so if any or you guys need aerating done let me know.....

[TSG]

Party ?????

Game on

[A-Cut-ABOVE]

hey alan I might have a mowing for you in thornton ..interested????

[TSG]

hey alan I might have a mowing for you in thornton ..interested????

Sure.....
I also need Black mulch,,,got some?

[A-Cut-ABOVE]

hey alan, let me know how much you need , when and where....pm me the details...or if you have my email you can do that also...

[Dotens]

ken saw your ad in craigslist under farm and garden lol. Just kidding but seriously check it out. This guy travels all of the lakes region area to mow lawns for 25 up to 45 bucks a cut. I'm thinking of subing him out LOL. I hate low ballers:cry:

[A-Cut-ABOVE]

hey I got to pay for my new truck some how...lol
No really I would think that was scotts ad but he probably cant type after hanging out with jason all day... ahhh to be young and in love....... HA HA

Bill call me if you want those measurments...

[N.H.BOY]

ken saw your ad in craigslist under farm and garden lol. Just kidding but seriously check it out. This guy travels all of the lakes region area to mow lawns for 25 up to 45 bucks a cut. I'm thinking of subing him out LOL. I hate low ballers:cry:


AHHH BILL that's my ad............:drinkup:

[GreenMonster]

These new diesels ain't loud. What a difference from the 7.3

How about a get together at my new place? Bring you chainsaws, lots of trees still need to be cut :D

Jason, Zach, where's all this work you've been talking about?

Zach, you get a call from Berwick today? Gave your name out.

Jason, you ready to quit schlepin' coffee?

[N.H.BOY]

OK Mark-----your truck beats KEN's hands down for sure. sweeeeeeeeeeeet

[A-Cut-ABOVE]

when i get the same plow and stainless sander will you change your mind ? or are u just saying that cause its a ford....

[jsaunders]

cause its a ford....

Plus it is a F550 - will work circles around the chebby- although the F550 does need a CHROME grill (poke -poke)

I will try to post pics of my 'new'(er) truck.

[A-Cut-ABOVE]

Plus it is a F550 - will work circles around the chebby- although the F550 does need a CHROME grill (poke -poke)

I will try to post pics of my 'new'(er) truck.

only difference between a 350 450 550 is the amount of weight it will carry????? same engines in all the trucks if i am not mistaken..

[jsaunders]

F450-550 have bigger front/rear end - much, much larger brakes and yes will carry alot more weight (safely and legally)


Ken - How many yards of mulch will you be able to put in that dump? I'm guessing 10 - will be heavy. Your truck just seems to need the front torsion bars cranked up some- Any better pics?

[GreenMonster]

Hey Ken, Scott likes mine better than yours! -- we are still talking about trucks aren't we?

Yes, it does need chrome, but hey, it's for work. Besides, it was one of those "what do you have on the lot that I can pick up TODAY!"

Same engine, different GVW's.

[A-Cut-ABOVE]

scott can like yours better thats ok with me as long as im still delivering his mulch and collecting a check....lol
joel , id say 9-10 yrds, i havent taken any more pics yet, my camera is in florida with my wife,,, i like how it sits , it actuall fells a bit higher than my 05 2500hd
i like the truck alot..... I had a pallet of fert in it today 50 50lbs bags.. didnt even knoe it was there....

[mtnzone]

OK im in where ever it is.. What we drinking?

Man i wish I had one of your guys new trucks.... I have 2006 gmc 1500 and a 1994 f350 sweet sweet shape with 34,000 miles, poly spreader, and 8' fisher quick mount..

But if I had my druthers I would rather plow with the 1500. it has a 7.5 quick mount. Perfect for my winding driveways here in the whites.. that truck has some balls.....but the 350 looks mean.......lol

[A-Cut-ABOVE]

hey mtn where about are you located up in them there hills????

[jsaunders]

Yes a big difference having a pallet of fert in a single wheel vs dual truck.Plus the Dmax has some power and more tq than the gas engines- Tq is the best part about diesel engines- JUST WAIT TILL YOU PUT A PROGRAMMER (CHIP) ON THE TRUCK 400hp/700tq really moves a truck.

You will want to get a set of guages for that truck- very important to watch exhaust and trans. temp esp when hauling/towing.

[mtnzone]

hey mtn where about are you located up in them there hills????


Im one of the small guys in Conway NH....
there are alot of companies up here.. but seem to be holding my own......

[A-Cut-ABOVE]

thats the beauty of the d-max it doesnt need to be chipped.... i have a trans sensor built in not a exhaust tho..

conway not to far away..... good that you are making it...

[jsaunders]

you say that now- every diesel with a chip is a night and day difference:) Don't put all of your trust in factory 'idiot' guages- they have been know to be off quite a bit whether Chevy/Ford/Dodge

[A-Cut-ABOVE]

ya but there is alot to be said for a warrenty with only 200 miles on the truck

[mtnzone]

True true... aND ALOT TO BE SAID FOR A 1994 F350 IN MINT CONDITION THAT YOU CAN WORK ON YOURSELF, AND NOT HOOK UP TO SOME SENSOR FOR $85 AN HOUR.......:laugh:

ya but there is alot to be said for a warrenty with only 200 miles on the truck

[A-Cut-ABOVE]

got that right...!!!!!

[hotshot4819]

mark, its coming, the guy isnt 100 percent ready, he told me the other day he would call me when he has a timeline.

[jsaunders]

True true... aND ALOT TO BE SAID FOR A 1994 F350 IN MINT CONDITION THAT YOU CAN WORK ON YOURSELF, AND NOT HOOK UP TO SOME SENSOR FOR $85 AN HOUR.......:laugh:

Alot to be said as well when every time you turn a wrench on that older truck you end up snapping every bolt off that you touch:)

No I wouldn't put a chip on a 200 mile truck- esp with the warranty- but that is why I buy used trucks (save money and MODIFY right away):laugh:

[T. Matthews]

Hey I need a good reputable LCO to maintain my finaincal advisors home in Bedford NH. Please email if interested tom@tmatthews.net

[jsaunders]

Emailed you T. Matthews
Joel

[N.H.BOY]

Emailed you T. Matthews
Joel

JOEL--are you kiddna me? how far away are you from Bedford? I heard you made a deal with the devil (jason) let me know if it does not work out..:hammerhead: Ill take care of him.


KEN--got dark brown mulch? not mcdonalds red!!!! Ill need it in two weeks about 10 yards,,,will you truck handle it?:laugh: P.M. with price...drop and go just past gov.island down the road where you helped jason with lawn on Dockham shore road. P.M. price thanks..

[mtnzone]

Alot to be said as well when every time you turn a wrench on that older truck you end up snapping every bolt off that you touch:)



hENCE MY NEWER BACKUP.......:usflag:

bUT LAST WEEK i HAD THE F350 IN FOR A THOROUGH LOOK THROUGH FROM MY MECHANIC AND WHEN HE HAD IT UP ON THE LIFT HE COULDNT BELIEVE THE SHAPE IT WAS IN. AND WHEN HE RAN THE ENGINE DIAGNOSTIC HE WAS BLOWN AWAY..

Im stoked......:clapping:

[jsaunders]

[QUOTE=N.H.BOY;2301113]JOEL--are you kiddna me? how far away are you from Bedford? I heard you made a deal with the devil (jason) let me know if it does not work out..:hammerhead: Ill take care of him.
[QUOTE]

Bedford job is 10 mins from some of my other jobs:)

Hey Scott- Pee on any hoods lately?:laugh::laugh::laugh::laugh:

[hotshot4819]

if any of you guys with the ford 6.0's want a 4 inch turbo back exhaust let me know.
I just put on a 5 inch turbo back,
increase power,mpg
250 bucks

[GreenMonster]

hey Zach, saw you the other day in Somersworth.

Getting busy?

[A-Cut-ABOVE]

I have a mount for the front of a ford truck for a leaf loader. If any of you ford guys are looking for one let me know....

[hotshot4819]

mark, very busy,

[hotshot4819]

and thanks for the refferal the other day for the berwick,me job. you ever here anything on that church?

[A-Cut-ABOVE]

So where is everyone? You cant all be working all the time....
If anyone has any brush jobs and needs some chipping done I now have a hp100 brush bandit chipper...... just throwing it out there

[mtnzone]

anyone from wolfoboro area.. I was in wolfeboro today and saw alot of lanscapers/lawnguys out and about. I have a huge cleanup job down there.. If any of you guys are from that area. im jealous. alot of nice houses around there.

Wow.... $$$$$

[N.H.BOY]

So where is everyone? You cant all be working all the time....
If anyone has any brush jobs and needs some chipping done I now have a hp100 brush bandit chipper...... just throwing it out there

Yea Ive got a chipper too...holds up to 4 foot logs can take leafs also it can take half pallets ----------called an outside furnace:laugh:

[N.H.BOY]

anyone from wolfoboro area.. I was in wolfeboro today and saw alot of lanscapers/lawnguys out and about. I have a huge cleanup job down there.. If any of you guys are from that area. im jealous. alot of nice houses around there.

Wow.... $$$$$

How far of a drive for you from where you at? Yea nice homes out there for sure.

[TSG]

So where is everyone? You cant all be working all the time....
If anyone has any brush jobs and needs some chipping done I now have a hp100 brush bandit chipper...... just throwing it out there

Ken
I will call you about mulch Wed am........
Alan

[mtnzone]

Im about 30 minutes away, wouldnt normally take it but the woman was persistent and the $$ was right, Im doing another big job in ossipee near court house so I can add the two together..

Are you from that area. you dont happen to drive a dark blue ford, and were in the hardware store today?? two guys came in from STEVES something and something, and one used to work there??


How far of a drive for you from where you at? Yea nice homes out there for sure.

[hotshot4819]

i have a potential harley racking and hydroseeding in wier nh if anyone is interested. I dont mind doing the hydroseeding part, however i dont have the time or ambision to tackle the harley racking that far away from me..

let me know if anyone is interested in teaming up..

[hotshot4819]

also forgot to mention its 3/4 of an acre

[GreenMonster]

i have a potential harley racking and hydroseeding in wier nh if anyone is interested. I dont mind doing the hydroseeding part, however i dont have the time or ambision to tackle the harley racking that far away from me..

let me know if anyone is interested in teaming up..

You better clarify, Zach -- that's Weare, NH. And no, I'm not interested. :)

[hotshot4819]

haha.. thanks mark....

[N.H.BOY]

Yea I thought you meant Weirs beach:hammerhead:

[N.H.BOY]

Im about 30 minutes away, wouldnt normally take it but the woman was persistent and the $$ was right, Im doing another big job in ossipee near court house so I can add the two together..

Are you from that area. you dont happen to drive a dark blue ford, and were in the hardware store today?? two guys came in from STEVES something and something, and one used to work there??

That's a NO I've got a black ford crew cab Tilton area....

[hotshot4819]

sorry guys, i aint to familiar with the sticks that your from. lol

[KINGSBURYLANDSCAPELLC]

sorry guys, i aint to familiar with the sticks that your from. lol

ya... why is it all my jobs are 45 minutes away!?!?!


Geesh looks like everyone is keeping busy and then some! Why is it everyone else is getting new truck and mine is .... 22 years old?! lol, must be because i decided to make coffee this winter instead of moving the white stuff

Joel i will get in touch with you about that trailer again. sorry this week didnt work.

Ken with all the work im sending your way i dont want to hear you bitching!:laugh:

Scott, thanks for the new power broom... worked good today:cool2:

[KINGSBURYLANDSCAPELLC]

p.s. Mark sorry i havent had a chance to get back to you yet. will do though

[GreenMonster]

p.s. Mark sorry i havent had a chance to get back to you yet. will do though

yeah, what's up with that?!?! :nono: I get no respect!

I'm home right now......

[jsaunders]

Jason - you around tomorrow? (although I might not be:rolleyes:)

[A-Cut-ABOVE]

Jason what did you get paid from one of your jobs and get the internet hooked up????

[N.H.BOY]

Jason what did you get paid from one of your jobs and get the internet hooked up????

Na--he is either at the Tech in Concord using theirs, or he's at my house using it....oh sh*t:confused: I hope he's not at my house. Im on my laptop at my wife work...Im callling you Jason now.

[A-Cut-ABOVE]

scotty boy.. check your pm

[hotshot4819]

holy crap, where you guys been... will be in the gilford area wednesday..

[GreenMonster]

holy crap, where you guys been... will be in the gilford area wednesday..

does that include wolfeboro?

I prepped that 38K today. As long as town is still seeding it (i'll know tomorrow) you'll be ready to go.

[A-Cut-ABOVE]

been busy busy..... damn to much work and not enough hours in the day....I might be around opn wednesday... who knowssss

[hotshot4819]

yes mark that includes your wolfboro job, i will call you tomarrow for the address. and i will discuss the ball field job with you then., would be nice to spray all three at once.

[mtnzone]

man i have been busy at doe big resi jobs in wolfoboro and ossipee....... glad to get out of there for a couple of days.. 30 yards of mulch is enough for me...Now onto selective cutting a 250' X 75' birch area.....and more cleanups.....

[T. Matthews]

Hey I need a REPUTABLE LCO to do a maintenance Acct in Bedford NH. JSaunders, I thought you were one? Please email me if interested. The lawn needs mowing ASAP.

[M&MLawn]

Hey Tom....bought the trailer from you. Depending on where in Bedford this may be one we can do. If you want to PM us feel free.

[jsaunders]

Hey I need a REPUTABLE LCO to do a maintenance Acct in Bedford NH. JSaunders, I thought you were one? Please email me if interested. The lawn needs mowing ASAP.
Tom
I spoke with him - I just haven't had the time to get up there 'yet'.

[T. Matthews]

If you want the job, I would suggest you get up there soon, because his grass is getting high. It will be a race between you and M & M to see who get there first.

[hotshot4819]

HOLY CRAP......Did I get lost or what today going from GUNSTOCK to wolfebor/wakefield........

Thanks Mark I was almost ready to give up..

never seen so many farms in my life lol

[A-Cut-ABOVE]

City boys......HA HA
lost on thefarm???

[mtnzone]

HEY QUICK QUESTION. For the guys in Wolfeboro area. I need flat stone for walkway in shade garden. Where do you guys get it?? Spiderweb doesnt carry it any suggestions??

Thanks

[GreenMonster]

HEY QUICK QUESTION. For the guys in Wolfeboro area. I need flat stone for walkway in shade garden. Where do you guys get it?? Spiderweb doesnt carry it any suggestions??

Thanks

Gilbert Block, stop in Tamworth on your way down.

[M&MLawn]

Tom meeting with him tomorrow :)

Thanks

[N.H.BOY]

HEY QUICK QUESTION. For the guys in Wolfeboro area. I need flat stone for walkway in shade garden. Where do you guys get it?? Spiderweb doesnt carry it any suggestions??

Thanks

Yea check with KEN---I found alot at the bottom of my mulch he dropped of for me:laugh: just kidda KEN stuff was fine thanks again.....I was going to say Gilbert Block also.

[A-Cut-ABOVE]

ya thanks buddy, did you get that all finnished up? I told my guy that delivered and loaded it that you were talking **** about him...lol
By the way is it the end of the month yet....lol
Smart a**

used to be able to get it out on 104 in new hampton but you got to make an appointment with them to pick stuff up. now. pain in the butt....

[mtnzone]

Thanks Mark... yeah know that group.. good stone there. just was hoping there would be someone closer to the job so i would have to haul all the way down to wolfeboro.


Gilbert Block, stop in Tamworth on your way down.

[jsaunders]

Tom meeting with him tomorrow :)

Thanks

Good luck M&M- I just haven't had the time to get up there - working till 7pm everyday doesn't leave much time to check on a lawn.

Anyone sick of mowing yet? 2 weeks of straight 10-12 hrs of mowing by myself SUCKS!

[hotshot4819]

jsaunders, call jason, im sure he is sick of 12 hour days making coffee...
plus getting on the step stool must start hurting your legs after a few hours

[mtnzone]

i really havent started mowing as of yet.. just finishing up all my spring cleanings up here.... but by friday ill be mowing a ton!!!! yipee.. spring cleanups killed me this year

[GreenMonster]

Thanks Mark... yeah know that group.. good stone there. just was hoping there would be someone closer to the job so i would have to haul all the way down to wolfeboro.

there is also the mountain greenery on rte 16 in Ossipee -- hop skip and a jump from Wboro. you'll probably pay more there though.

[mtnzone]

Yeah we are buying alot of our plants there this year for big ossippee job......


there is also the mountain greenery on rte 16 in Ossipee -- hop skip and a jump from Wboro. you'll probably pay more there though.

[GreenMonster]

we buy a lot of perennials there. they grow some nice ones real early. we'll probably hit them tomorrow or Fri for our first perennials of the year.

[hotshot4819]

mark sent ya 2 emails.

[mtnzone]

We are hitting them on saturday for 100 flocks,some various ground covering plants, some junipers, miniature rhodos, and some perennials.... dont buy them all.... Where are you based out of??

we buy a lot of perennials there. they grow some nice ones real early. we'll probably hit them tomorrow or Fri for our first perennials of the year.

[GreenMonster]

Wakefield. I'm about 10 minutes south of Mountain Greenery

Delphiniums, echinecea, rudbekia, hybrid lilly, and bee balm are mine!

You can have all the phlox you want, especially if they are of the creeping variety! :D

[mtnzone]

lol.... they are oif the creeping kind.. lady wants all flocks on the this hillside 75' x 8 feet.. the 100 are just a start........;)......


Wakefield. I'm about 10 minutes south of Mountain Greenery

Delphiniums, echinecea, rudbekia, hybrid lilly, and bee balm are mine!

You can have all the phlox you want, especially if they are of the creeping variety! :D

[GreenMonster]

Hey guys, still looking for employees here. Qualified/experienced and laborer types as well. need hardscape guy and/or someone with machine experience and/or landscape installation experience.

Good pay, vacation, holidays, partial health, plus I'm a super nice guy to work for:rolleyes:

fulltime, year round work.

[TSG]

Hi Guys,
One of my football players is looking for Summer work
He is a great guy, super dependable, ,,,,the problem is that he is only 15
and lives around Meridith.
I would take him, but don't have enough work in that area.
Any takers, let me know...
Thanks
Alan

[N.H.BOY]

Hi Guys,
One of my football players is looking for Summer work
He is a great guy, super dependable, ,,,,the problem is that he is only 15
and lives around Meridith.
I would take him, but don't have enough work in that area.
Any takers, let me know...
Thanks
Alan

Hey Alan--can he swing a hammer for some deck buiding?

[TSG]

Hey Alan--can he swing a hammer for some deck buiding?

He will do anything, I wish I had more for him because I would
be able to count on good Summer help for 4 yrs.
Thanks
Alan

[N.H.BOY]

FINALLY------got some lawns mowed this past few days:dizzy: It's about time.

[Green Team Landscaping]

holy crap. i didnt think i'd see you on this.

its connor by the way.

[GreenMonster]

wow. quiet here. everyone good and busy I hope?

[hotshot4819]

mark, i think there all just in hidding... aint that much work up there in the boonies lol....

hope you all are doing well.. will be up there later next week for belknap..

[jsaunders]

Quiet yes-
busy YES-
Fully mowing YES-
TIRED YES!!!

Some lawns are having 6'' + of growth within in a week (ahhhhh spring growth)

[TGM]

i'm exhausted, already getting burnt out, and haven't had the time or energy to clean the equipment:realmad:

[A-Cut-ABOVE]

ok everybody stop your complaing and get back to work. then again you would all be complaining if there was no work...lol

Scott have you picked a day yet?????

[jsaunders]

grass is growing like crazy- Plus with some super nitrogen fert that some companies put down -we end up cutting off 6+"

Nice to have Monday off- but now cram 5 days of work into 4 :hammerhead:

Ken - Hows the new dump working out?

[TGM]

Nice to have Monday off- but now cram 5 days of work into 4 :hammerhead:

except that i had to give a quote before seeing some family. :hammerhead:

how are you solo guys doing with the big jobs? boy i don't think the stress and time is worth it in my situation. too much time trying to line up other work takes away from getting work done in the busy schedule and also having too much money out on materials (when 1/3 down doesn't cover it)....

right now i can't keep up, but in august i'll probably be twitling my thumbs. ah well.

-tom

[jsaunders]

except that i had to give a quote before seeing some family. :hammerhead:

-tom
I'd rather give quotes THEN SEE FAMILY:laugh:

[TGM]

i'm really anal with my equipment being clean, especially the inside and outside of my truck. just didn't have time yesterday to clean any of it, give the estimate, then head up to maine. grr. maybe next sunday haha

[hotshot4819]

TGM, i havnt cleaned the inside of my truck in crap id say a year,, well obvousily i take the heavy soda bottles and bags and things, but i prob got a got 1/4 inch of dust on the dash board... no time..

I do clean the outside usually sundays to make it look fairly decent during the week.

[hotshot4819]

i think im ready to spend some of my hard earned winter money guys.... the 08 f350 dually is lookin pretty good.... cant let KEN be the only one with a new truck....... Oh and greenmonster,, atleast me and mark get the ford .haha:weightlifter:

[N.H.BOY]

Ford all the way:clapping: Joel's got em also:weightlifter: Finally clean ups are all done :dizzy: grass growing fast up here also. I have got one that I do on Mon. and go back on Thurs just to keep up with it. House is in the middle of an old farm pasture.

[A-Cut-ABOVE]

I wouldnt buy one of those fords,, no way after driving my truck what a difference.... and towing...it pulls my skid like it is not even there......

[N.H.BOY]

Hey Ken, do you think my trailer will hold a skid steer?

[hotshot4819]

Ken , those chevys are nice for the older gents, we understand its hard to get your legs up into a real truck.... haha... its alright jsaunders, greenmonster and myself, will hold the fort down with the fords.

[A-Cut-ABOVE]

Hey Ken, do you think my trailer will hold a skid steer?
your landscape trailer??? i doubt it. what are you going to with one of them ???? hurt yourself probably...ha ha... what mine isnt good enough for you????

you guys can have the fords.....i drove the 08s and wsa not impressed at all!!!! no power at all in the ones i drove the diesel and v-10 were no comparision....

[TGM]

DPFs...:hammerhead:

the 08 6.4's aren't that powerfull, even with an sct (though that may change if injectors, etc. come out).


i guess i'm the black sheep...on my 3rd cummins at age 23 :cool2:



and as far as the ford v10? why bother, gutless wonder at 8mpg towing.

[hotshot4819]

tgm,,,,
they've already come out with dpf deletes, sct chips. injectors...... sparton deisel, and a few other companies are ahead of the pac

[GreenMonster]

Ford, Chevy, Dodge, blah blah blah.

They're all great when the run, they all suck when they don't. They all make a chit run of something once in while, then go back to drawing board and fix it. aka, ford 6.0 diesel, dodge tranny, etc.

It's an age old debate that will never die. I just kinda started with Ford's, and overall, have had good luck.

[jsaunders]

Ford, Chevy, Dodge, blah blah blah.

They're all great when the run, they all suck when they don't. They all make a chit run of something once in while, then go back to drawing board and fix it. aka, ford 6.0 diesel, dodge tranny, etc.

It's an age old debate that will never die. I just kinda started with Ford's, and overall, have had good luck.

X2

Just added my 4th Ford- BUT mine are the best- 7.3:laugh:
6.4 diesel will make 490hp @ the wheels with a dpf delete and tunes:eek:
Ken -any diesel truck will pull better then a gaser any day of the week.
Scott- How wide is your trailer? I'm looking for one that is 6'10" wide X 18 or 20'. When you going to come down and pick up mini me's trailer?

Anyone looking for a Echo SRM 260 trimmer?
Joel

[TGM]

i've been hooked on the cummins since my dad bought a new dually in 94. only "problem" is is that mine are a lot louder, a lot smokier, and a lot faster.

zach, i see elite-diesel.com has injectors and the such already out, schweet.

http://www.youtube.com/watch?v=UJ3yzOq6EcE

you know, they all suck. they're all work. personally i like the ford truck (though i love my new dodge, i love the older dodge's but the front ends can never be stiff and wear the tires evenly). i've gotten sick of gm after working on them too much and have an attitude against IFS. BUT, basically buy whatever makes you happy and fits your situation... not what other people want.

[KINGSBURYLANDSCAPELLC]

Well sorry to ruin the silence for everyone.... but IM BACK!:waving:

ya lets just stay away from the Fords... even as badly as my old chevy is rotting away i feel safer in it than in Scotts truck... or maybe thats just because he is driving it:cry:

[jsaunders]

i feel safer in it than in Scotts truck... or maybe thats just because he is driving it:cry:

:laugh::laugh::laugh:

When you bringing your 'heap' down here to get the trailer? That hardscape job we talked about was put on hold till next year.

[KINGSBURYLANDSCAPELLC]

:laugh::laugh::laugh:

When you bringing your 'heap' down here to get the trailer? That hardscape job we talked about was put on hold till next year.

when i have free time:confused: cant all have down time like... well i wont say any names... :cough: Ken :cough:

Any chance of meeting me in manchester this week?

[A-Cut-ABOVE]

if you meet up with joel grab that sulkie for me from him. and ill mail joel a check for it ...unless scott ever decides when he will have the cook out at his house...than we can do it there..

[jsaunders]

Manchester meet MAYBE if it rains a day this week IDK

Ken- which sulky did you want black or orange- the orange one was the cheaper/ beat up 'more' one.

Any dates for the cook out yet? Or we could just meet @ Famous Daves BBQ in Manchester. Beer and BBQ:)

[N.H.BOY]

if you meet up with joel grab that sulkie for me from him. and ill mail joel a check for it ...unless scott ever decides when he will have the cook out at his house...than we can do it there..

Yea still can have it at my house if you guys still want to. The two weekends of motorcycle week are out as I go over there for some beer and fun:drinkup:, but other than that besides 4 of july weekend Im up for any weekend if you guys have any suggestion. Wife and kids are more than welcome as I have tons of toys of course and bring your beer:drinkup:

[A-Cut-ABOVE]

Ya joel I guess the orange one as its going on my scag and will match.

I think a sunday would be a good day as long as jason isnt making coffe that day...lol

[KINGSBURYLANDSCAPELLC]

Ya joel I guess the orange one as its going on my scag and will match.

I think a sunday would be a good day as long as jason isnt making coffe that day...lol

after next weekend no more Dover starbucks for me! transfering to the tilton starbucks so it will free up my weekends a bit more

[hotshot4819]

oh no jason,,, you mean i wont beable to see the OL CHEVY in the parking lot anymore...

[N.H.BOY]

after next weekend no more Dover starbucks for me! transfering to the tilton starbucks so it will free up my weekends a bit more

Sweeeeeeeeeeeeeeeeeeet FREE coffee for the o'l man:clapping:

[hotshot4819]

nhboy... Dont bet on it..
he cant reach the coffee pots, they have him picking up the dropped change behind the counters..

[jsaunders]

no- he keeps the grout in the tile floors clean---- easy to do when you are at eye level with the grout lines:laugh:

[KINGSBURYLANDSCAPELLC]

oh no jason,,, you mean i wont beable to see the OL CHEVY in the parking lot anymore...
ya sadly not... soon i might be working my way up to a mid 90's chevy:weightlifter:

Sweeeeeeeeeeeeeeeeeeet FREE coffee for the o'l man:clapping: since when have u been buying starbucks??? everytime u go its coupons for free drinks:hammerhead:

nhboy... Dont bet on it..
he cant reach the coffee pots, they have him picking up the dropped change behind the counters..
haha its a good thing someone else here is my height... we cant all be like 7'9" Joel;)

[T&J Landscaping]

Anyone here looking to sell accounts

[KINGSBURYLANDSCAPELLC]

Anyone here looking to sell accounts

What services do you provide? I have a growing customer base in the Concord area

[N.H.BOY]

Anyone here looking to sell accounts

You need some Im guessing !! Im right above you in Northfiled. Do you have some now over there?

[hotshot4819]

KEN.... got any fill? also, whats the going rate for Loam up there? i have a job i need 20 yards, also might need either ken or mark to help me out with the raking... customer in gilford...

[GreenMonster]

KEN.... got any fill? also, whats the going rate for Loam up there? i have a job i need 20 yards, also might need either ken or mark to help me out with the raking... customer in gilford...

Zach, where do you need the loam?

[KINGSBURYLANDSCAPELLC]

KEN.... got any fill? also, whats the going rate for Loam up there? i have a job i need 20 yards, also might need either ken or mark to help me out with the raking... customer in gilford...

Take the cost of material in Somerworth/Dover and about double it!

i think loam is over $30 a yard

Mark did you get the material you needed for the Pittsfield job?

[hotshot4819]

dont have the exact adress but its in gilford..

im going to take another look at the job friday after i finsih spraying in gilford(medical office on 11a

[GreenMonster]

Take the cost of material in Somerworth/Dover and about double it!

i think loam is over $30 a yard

Mark did you get the material you needed for the Pittsfield job?

Jason, I need to call him tomorrow.

Loam around Alton, Wboro, maybe even Gilford I can probably set you guys up for around $20 a yard..... delivered. all depends on how far it has to go.

[hotshot4819]

mark, i will call you friday about the loam and raking it out for me.

anyhting going on with the church?

[hotshot4819]

and mark, the house in wolfboro today for BELKNAP...... HOLY crap. they have a fricken pizza oven that looks like a mountian(outside) must be nice to piss awayh money.

[GreenMonster]

mark, i will call you friday about the loam and raking it out for me.

anyhting going on with the church?

yeah, I have 100 yds of loam sitting there that I HAVE to spread and till in this week.

It should be ready to seed next week.

[GreenMonster]

and mark, the house in wolfboro today for BELKNAP...... HOLY crap. they have a fricken pizza oven that looks like a mountian(outside) must be nice to piss awayh money.

yeah, I've heard a lot about that place, but haven't seen it yet. I hope to soon.

[hotshot4819]

had to fricken go threw security check to go into the place,

[N.H.BOY]

had to fricken go threw security check to go into the place,

Hey was that Bob Bahre's house? I know belnap takes care of his place. I was told it was very very huge place.

[hotshot4819]

nhboy, no idea, its just being built.place is pretty much built with stones, lookes like a castle, copper roof. landscaping you couldnt believe,

also in the "living" room. there are 2 speakers worth 36 thousand dollars.... they stand waste high lol.

[KINGSBURYLANDSCAPELLC]

nhboy, no idea, its just being built.place is pretty much built with stones, lookes like a castle, copper roof. landscaping you couldnt believe,

also in the "living" room. there are 2 speakers worth 36 thousand dollars.... they stand waste high lol.

now is that waist high on you Zach? ... cuz thats only knee high on Joel

[jsaunders]

now is that waist high on you Zach? ... cuz thats only knee high on Joel

or just out of your reach:laugh:

[hotshot4819]

jsaunders, THATS PRICELESSS:clapping:

[A-Cut-ABOVE]

didnt any of you slackers work today?????

[hotshot4819]

ken i know your geting old, but cant you see the rain coming down?

[N.H.BOY]

didnt any of you slackers work today?????

Yea I finished up on a deck today and had to help Jason cut down a tree..I tied a rope around his waist (for some weight) and just threw him up though the branches so I can pull down some limbs:laugh:

[GreenMonster]

didnt any of you slackers work today?????

tore out a concrete walkway. that was fun!

[KINGSBURYLANDSCAPELLC]

Yea I finished up on a deck today and had to help Jason cut down a tree..I tied a rope around his waist (for some weight) and just threw him up though the branches so I can pull down some limbs:laugh:

the tree i climber was more like a stump to all you giants out there

[A-Cut-ABOVE]

ken i know your geting old, but cant you see the rain coming down?

Actually it only sprinkled here all day. wasnt a hard rain at all, but it was enough to get things wet...

[jsaunders]

Steady rain here all day- did 4 hrs of invoices (haven't done any since the start of the season 3-25-08:nono:) Then ran errands. It was pretty bad the radar on the phone showed- No precip. from 11am on yet never stopped raining/heavy drizzle

Joel

[KINGSBURYLANDSCAPELLC]

Steady rain here all day- did 4 hrs of invoices (haven't done any since the start of the season 3-25-08:nono:) Then ran errands. It was pretty bad the radar on the phone showed- No precip. from 11am on yet never stopped raining/heavy drizzle

Joel

thats ok Joel, we know you could take a whole year off without invoicing people and it would only effect the # of businesses you buy out this year:p

[jsaunders]

thats ok Joel, we know you could take a whole year off without invoicing people and it would only effect the # of businesses you buy out this year:p

If it was only that easy:rolleyes: I wish I didn't have anything to do today we could have met in manchester- guess we can hope for a rainy day next week!

[KINGSBURYLANDSCAPELLC]

I had no idea it was suppose to rain today...

Anyways, so lawn site is all about helping each other out. So i figured i would share a story from yesterday:

I get a call from one of my customers (a doctor!). He says that he has "burrowing chipmunks" diging up his lawn... ok. Then it was followed by the words "i think i took care of them though, but do you mind checking on it?"

And here is what you use to take care of "burrowing chipmunks"!
Just sprinkle it all over the lawn and put a box next to every plant in the beds and you'll be fine! And thats the proper way to deal with "burrowing chipmunks" if your customers ever get any.

[KINGSBURYLANDSCAPELLC]

the lawn area... i had to rake it all up and remove a trash bag full of it.

[jsaunders]

the lawn area... i had to rake it all up and remove a trash bag full of it.


A trash bag full of what? DEAD 'burrowing chipmunks':laugh::laugh::laugh:

And NO it wasn't supposed to rain today- now we get to mow on SAT in the high 80's

[A-Cut-ABOVE]

Wht didnt the doctor just ask you to run thru the tunnels yourself. You could of fit in there. LOL

[hotshot4819]

guys anyone want to give me pricing to deliver 30-40 yards of loam. Going to route 3 right near the gulf station and that restaurant. i have to go to my truck to get the exact info, but thats a start for ya...

Also the guy is in need of Fill for another section so if you had some your trying to get rid of or whatnot let me know..

[KINGSBURYLANDSCAPELLC]

guys anyone want to give me pricing to deliver 30-40 yards of loam. Going to route 3 right near the gulf station and that restaurant. i have to go to my truck to get the exact info, but thats a start for ya...

Also the guy is in need of Fill for another section so if you had some your trying to get rid of or whatnot let me know..

Why cant i not think of where it is you are talking about?:confused:


Joel sorry i didnt get a chance to call you back the day went downhill quick and ended with finding out one of my best friends died........ a week ago

[jsaunders]

No problem Jason- Sorry to hear about your friend.

[hotshot4819]

guys sorry, its right near the sharimar restaraunt , route 3 tilton/belmont line....

[KINGSBURYLANDSCAPELLC]

oh ok. Zach there is a landscape supply place like a quarter of a mile away, Tilton nursery they usually have decent material and give contractor discounts and offer delivery if that helps. if you are looking for someone in the area with a 1 ton Ken or Bill (BAMAA) may be able to help you out.

[KINGSBURYLANDSCAPELLC]

oh ok. Zach there is a landscape supply place like a quarter of a mile away, Tilton nursery they usually have decent material and give contractor discounts and offer delivery if that helps. if you are looking for someone in the area with a 1 ton Ken or Bill (BAMAA) may be able to help you out.

[N.H.BOY]

Yea I think last time I checked at Tilton Nursery is was 60-65 bucks a yard for loam.

[hotshot4819]

holy piss, 65 bucks for a yard of loam, i can get it for 15 bucks down here... sometimes cheaper...

I called virgin construction corp, they have a big stock pile, 15 bucks for loam delivered and 3 bucks a yard for clean fill..... guess im going with that...

[KINGSBURYLANDSCAPELLC]

Yea I think last time I checked at Tilton Nursery is was 60-65 bucks a yard for loam.

Scott how many beers did you have tonight? Dear God its a good thing you dont do many estimates for that kind of stuff:hammerhead:

[N.H.BOY]

Oh dude no sorry I think like 30-35 bucks sorry....:hammerhead: yea Ill stick to decks and " I mow it NOT grow it" only had 5 beers:drinkup:

[T&J Landscaping]

Any one selling accounts,

if so you can email witht the towns you have

email me at
bones11_2@hotmail.com

[A-Cut-ABOVE]

after last week i have a whole list ill sell ya.....HA HA

[T&J Landscaping]

lol sure send the list

[KINGSBURYLANDSCAPELLC]

Oh dude no sorry I think like 30-35 bucks sorry....:hammerhead: yea Ill stick to decks and " I mow it NOT grow it" only had 5 beers:drinkup:
I mean Geesh Scott! $60-65 you'd swear he was buying material from Ken:laugh:

[A-Cut-ABOVE]

I mean Geesh Scott! $60-65 you'd swear he was buying material from Ken:laugh:


Geesh, didnt know I was so expensive!!!! Just think with the amount of money you save in gas not driveing up here to spray paint the mulch for dig safe you could afford me....ha ha

[hotshot4819]

Mark, dont see that pile getting any smaller lol.....

[TGM]

anyone interested in an enclosed trailer?

i'm toying with the idea of trading towards an open dual axle + cash to relieve some of my debt and do a custom built half dump trailer (HATE! throwing material into my personal/biz truck).

Tom

[GreenMonster]

Mark, dont see that pile getting any smaller lol.....

yeah, ha ha. He called me today. Not extremely happy with me. glad he's a man of the cloth.

I'm doing that Wed. Ready for you end of week.

[hotshot4819]

alright mark,,,,,, thursday is outta the question, wizdom teeth are getting pulled, all 4..(sounds like fun) so i will plan on fri or sat for ya..

[hotshot4819]

afterall i dont want anyone that close to god mad at me lol.......

[KINGSBURYLANDSCAPELLC]

Geesh, didnt know I was so expensive!!!! Just think with the amount of money you save in gas not driveing up here to spray paint the mulch for dig safe you could afford me....ha ha

haha thanks again for doing that!

ya definetly wierd to come cruising down 107 tonight and *bam* middle of no where there's marks enclosed

[hotshot4819]

jason i still miss seeing the ol chevy hanging around town....

[KINGSBURYLANDSCAPELLC]

jason i still miss seeing the ol chevy hanging around town....

Haha, ya that this is a classical landmark! everyone knew when i was working. Hopefully in a month or so i will be riding incognito in something a little newer

[jsaunders]

anyone interested in an enclosed trailer?

i'm toying with the idea of trading towards an open dual axle + cash to relieve some of my debt and do a custom built half dump trailer (HATE! throwing material into my personal/biz truck).

Tom


How much you looking for the trailer?
What size open?
Joel

[N.H.BOY]

alright mark,,,,,, thursday is outta the question, wizdom teeth are getting pulled, all 4..(sounds like fun) so i will plan on fri or sat for ya..

Dude you wont be working at all the next day with four out had two out myself and I was out the next day full of pain pills:sleeping::dizzy::drinkup:

[jsaunders]

Dude you wont be working at all the next day with four out had two out myself and I was out the next day full of pain pills:sleeping::dizzy::drinkup:

X2 Plus you will puke blood if you happen to swallow to much- don't ask me how I know:rolleyes: (Had 4 out)

[N.H.BOY]

X2 Plus you will puke blood if you happen to swallow to much- don't ask me how I know:rolleyes: (Had 4 out)

Oh yea Joel I forgot about that..damn cotton balls in your mouth sucks...but Kingsbury is used to those in his mouth most of the time...his height is just right:dancing:

[hotshot4819]

time will tell as far as the working goes,,,, if not ill have to postpon everything until sat...
anything is better then the headackes i have all day everyday,, been like that for almost a full year now,, between insurance switchovers and the delay in appointments, its been a long wait

[GreenMonster]

I never had any wisdom teeth pulled.

Obviously the wisdom from these teeth are in my brain, which is why I'm smarter than you guys.

:angel:

[KINGSBURYLANDSCAPELLC]

I never had any wisdom teeth pulled.

Obviously the wisdom from these teeth are in my brain, which is why I'm smarter than you guys.

:angel:

i dont know about that Mark... if you were that smart you would stay away from talking to us all together:cool2:

[hotshot4819]

well i finally get online tonight,, had to run to best buy to get a new laptop.. I heard a snap and i looked over and my comp was smoking lol......

So No i have to Redo half of this years invoiced because i didnt backup for over a month or so... ahhh well,,, walked out with a few extra things as well.

[hotshot4819]

governers Island tomarrow...... maybe i can find a starbucks with a ol chevy in it ? lol

[A-Cut-ABOVE]

not unless you are going to be over near Tilton....

[hotshot4819]

KEN, Saw one of your boys over near lilp pond today..... only noticed it was one of your goons because of the plate ACA.

[N.H.BOY]

KEN, Saw one of your boys over near lilp pond today..... only noticed it was one of your goons because of the plate ACA.

What? I thought Ken was THE goonie:dizzy:

[A-Cut-ABOVE]

ya i had 2 guys over mowing in gilford today... that was the old gmc over there. what were they screwing around or actually working/

[KINGSBURYLANDSCAPELLC]

governers Island tomarrow...... maybe i can find a starbucks with a ol chevy in it ? lol
haha you may never know where i am
ya i had 2 guys over mowing in gilford today... that was the old gmc over there. what were they screwing around or actually working/
depends on if you tought them how to do their job:laugh:

[hotshot4819]

nah, he wasnt screwin around i will give him that much.... Takin his lunch break.,.. thats if you give them one..