View Full Version : Did Kawi keep the same mounting pattern for FC420V to V-twin?
02-24-2007, 03:10 PM
I found a great deal on a new Kawi 15 V-twin and need to know if they use the same mounting bolt patern as the FC420V I'll be replacing.
Thanks in advance, John...
02-24-2007, 07:41 PM
I replaced a Kawi FC540 17 hp single with a 14 FC 420. same bolt pattern.
It was on a 52 Lesco belt. to get less weight on drive wheels. The 14 works
great. The 15 should bolt up. Watch out for electric clutches. Ed
02-24-2007, 09:51 PM
Thanks, I thought it looked the same. This 15hp twin is going on a Bobcat Ransom 48" hydro WB so no electrics at all. Well other than the ignition.
02-25-2007, 01:11 PM
I would need to know your original spec# but possible replacements for the FC420V recoil starts are FH430V-CS21-S and CS22-S.
Hope this helps:)
vBulletin® v3.8.6, Copyright ©2000-2014, Jelsoft Enterprises Ltd.