PDA

View Full Version : Need Kohler 25hp carb pics


Wolfden
03-02-2007, 09:00 PM
Hoowdy folks , I just did a short block replacement on a Sears/Craftsmen GT5000 Garden tractor after 2 yrs :( anyways , I got it all the parts switched over only to forget how the stink'n springs go back on the carb :confused: :cry: , my bad for not take'n pics , would by chance does anyone have this model and be willing to take a pic or two ??? pleeeeese
Thanks in advance

:usflag:

Wolf

Restrorob
03-02-2007, 09:09 PM
http://67-72chevytrucks.com/vboard/images/smilies/welcomesign.gif Is this what your looking for ?

Wolfden
03-02-2007, 09:19 PM
I am printing it now ,, thanks I'll check it as soon as its finished

Wolf

Wolfden
03-02-2007, 09:26 PM
Its a little different ,, its a CV730 type 0017 thank you very much for looking and answering so quickly

Wolf


there are only 2 springs , do they both connect to the govener ?

Restrorob
03-02-2007, 10:10 PM
The above pic. is out of the CV17/CV745 service manual.

There should only be three springs in total.

A small long spring the slides over the carb. to gov. arm link rod, One that goes from the gov. arm to the throttle control rod and a short push spring under the throttle control lever where the throttle cable end hooks on top of the engine.

Wolfden
03-03-2007, 08:43 AM
Thanks for the pic , I think i m ight have it figured out now , I have to go away for the day but I'll try finishing the install tomorrow .
I think this turning out to be a great site :)

Wolf

Wolfden
03-07-2007, 03:19 PM
Hey Rob ... just wanted to let you know that I got her back together and seems tobe running fine , for the most part , probibly could use a little fine tuneing but it runs . lol now I'm gonna try hooking up the snowthrower.
Thanks again
Wolf

Restrorob
03-07-2007, 07:03 PM
No problem, Glad to hear you got it going.