View Full Version : Replacement Expanded Metal
03-06-2007, 11:15 PM
Looking for places that carry heavy duty expanded metal (steel) as used on trailer ramp gates. Mine from use is getting a bit bent up and it may just be easier to replace the 4x7 sheet then banging it all out and rewelding it. Any ideas on places to look, especially local places which would eliminate shipping fees?
03-06-2007, 11:18 PM
Look up.........dang it, they're in Joppatown. Intercon? They fabricate truck bodies etc.......should be able to hook you up with anything you want.
Joppatown exit off 95N......go right, make a right at light and entrance is at the top of the hill on the left........drive down the hill into the bottom. Good folks, I've taken several trucks there from past companies I worked for for various things.
03-06-2007, 11:53 PM
Thanks! Would this be... http://www.intercontruck.com/index2.htm ?
03-07-2007, 12:12 AM
thats them! cool place, go check them out
B. L. Landscaping
03-07-2007, 12:43 PM
I got mine at a local steel and welding shop try to find one by they should be able to cut a piece to the exact size you want. Mine cost around $60.
03-07-2007, 01:42 PM
Good deal, the truck place stock its and will sell it to me. Just need to get the old off and weld it all on :)
vBulletin® v3.8.6, Copyright ©2000-2015, Jelsoft Enterprises Ltd.