PDA

View Full Version : Sulky = void warrenty?


Lynden-Jeff
03-07-2007, 07:58 PM
Hey,

Will drilling for a sulky on my 48 inch walk behind void it warrenty? I thought I should ask before I do lol.

Cheers
Jeff

Restrorob
03-07-2007, 09:00 PM
This is where I would ask;

For additional information on warranty options, technical support or financing and leasing opportunities call 1-866-469-1CGC (1242).

Full warranty terms and conditions are available at your local dealer.

I'd get it straight from the horse's mouth.

MowerMedic77
03-07-2007, 09:07 PM
This is a good question, there are some manufactures that make sulkies for their equipment and some that don't. Most hydro w/b units can handle the extra load with no problem but, gear drive units tend to see more issue later on in life with the trans. Most issues will arise long after your factory warranty has expired. May still be a good idea to talk to your dealer, but if they sold you the mower and the sulky :hammerhead: they don't have much of a leg to stand on in my opinion.

Roger
03-07-2007, 09:18 PM
You don't say what kind of w/b mower. Beware of the John Deere, newer models. The frame around the rear is a hollow tube that doubles as a fluid reservoir. Drilling into that frame will be catastrophic.

Lynden-Jeff
03-07-2007, 09:31 PM
Hey,

Its a bobcat 48 hydro. Maybe I will ask my dealer before I do it.

Cheers
Jeff

LCPullman
03-08-2007, 12:49 AM
Ask you dealer to be certain. Some mowers may need strengthening (extra piece of metal needed).

Sydenstricker Landscaping
03-09-2007, 11:55 PM
I would ask first for sure before you do it, possibly even have them do it, and have it in writing from the owner if possible. As long as you arent 300lbs, it shouldnt be a prob

mini14
03-13-2007, 10:04 PM
warranty or no warrenty im not gonna walk anymore with my flat feet....that should be your concern and not some stupid warrenty.

Lynden-Jeff
03-13-2007, 11:28 PM
I would ask first for sure before you do it, possibly even have them do it, and have it in writing from the owner if possible. As long as you arent 300lbs, it shouldnt be a prob

lol not 300 but a good 265. I generally will not be using it, one of my employees will be who is around 160 so I don't think he will have a problem lol

Cheers
Jeff