PDA

View Full Version : Some pics of my new small 42 inch ZTR....


Rons Rightway Lawncare
03-16-2007, 05:48 PM
Here is the whole mowing rig ready to roll yesterday am...

Rons Rightway Lawncare
03-16-2007, 05:49 PM
Rear shot of the rig

Rons Rightway Lawncare
03-16-2007, 05:50 PM
Some of my lawn I cut with the new mower

Rons Rightway Lawncare
03-16-2007, 05:51 PM
looking the other way at my lawn

Rons Rightway Lawncare
03-16-2007, 05:53 PM
out in front of a customers house....

Rons Rightway Lawncare
03-16-2007, 05:55 PM
tailgate down.... time to make some money

Rons Rightway Lawncare
03-16-2007, 05:56 PM
the new mower

Rons Rightway Lawncare
03-16-2007, 05:57 PM
the controls

Rons Rightway Lawncare
03-16-2007, 05:58 PM
the dual hydros

Rons Rightway Lawncare
03-16-2007, 05:58 PM
discharge area

Albery's Lawn & Tractor
03-16-2007, 06:15 PM
Why the husky? Did you sell the 36" scag? Nice wildcat and I really like the truck.

Rons Rightway Lawncare
03-16-2007, 06:22 PM
selling the 36 scag, husky was priced right and I get to sit down and ride!

Lawn Enforcer
03-16-2007, 06:28 PM
I like the mowing rig. I don't mind husky's except the foot area is alot smaller than my Dixon.

Albery's Lawn & Tractor
03-16-2007, 06:31 PM
What you want for the scag? Can you either post some pics or email them to me?

Lynden-Jeff
03-16-2007, 06:35 PM
Looks good but you should really be backing those z's on. Looks like a really steep ramp.

Cheers
Jeff

srl28
03-16-2007, 07:42 PM
Whats that bracket for on the scag?? Grass catcher?

Rons Rightway Lawncare
03-17-2007, 12:01 AM
What you want for the scag? Can you either post some pics or email them to me?

Asking 2200$ with a 2 wheel velkie. The mower has very little time on it... matter of fact, the original blades that came on the machine have never even been off for a sharpening and they are still sharp. It is very clean, and in great shape. I don't think I ever took any pictures of it, and now it is up at the lawnmower shop inside the showroom on consignment. He said he can sell it for me quick, as todays prices on a new Scag 36 walkbehind are now 3 grand plus a velkie and tax brings it over 3500$.

I was going to list it here, but the guys on here seem to think a used walkbehind is only worth a case of beer, or maybe 200$ tops, so I didn't bother..... If you want it and think 2000$ is fair, I will sell it to you. I think it is worth it, it is practically a new mower... maybe has 20-30 hours run time on it tops, for way less than what a new mower would cost.

Rons Rightway Lawncare
03-17-2007, 12:02 AM
Looks good but you should really be backing those z's on. Looks like a really steep ramp.

Cheers
Jeff


It isn't as steep as it looks. Mowers go right up and down it no problems!

Rons Rightway Lawncare
03-17-2007, 12:03 AM
Whats that bracket for on the scag?? Grass catcher?

I use it to hold a 16 gallon spray tank made for ATV's. Tanks pump is powered by a 12 volt motor..... I made the bracket myself. Bracket also better protects the engine if I back into something.

dcondon
03-17-2007, 12:16 AM
Very nice looking set up you have.. Good luck this summer!!!!!!

justanotherlawnguy
03-17-2007, 12:29 AM
Looks good but you should really be backing those z's on. Looks like a really steep ramp.



The guy drives the mowers up and down every day. I think he knows which is best FOR HIM....

jlbf0786
03-18-2007, 05:00 PM
Hey Ron,

I have been wanting to see what your new truck looked like....

NICE!!!

Hope to have one someday!

jb...

charlotte nc