PDA

View Full Version : kawasaki igniter problem


jonh
03-26-2007, 10:09 PM
I have a kawasaki fb460v with no spark. The coil checks out fine but the igniter has 1.2 kohm across both terminals in either polarity. I think that means it is bad but i am not sure. I hate to spend $80 bucks on a part that is not bad . any help would by great thanks

Restrorob
03-27-2007, 12:17 PM
Here is the test procedures for both;


http://www.lawnsite.com/attachment.php?attachmentid=64502&d=1158460034

jonh
03-27-2007, 01:25 PM
RestroRob - thanks for the help. However, I have one more question. In the table 'control unit resistance', what does the ON stand for before the resistance reading? Do you have any idea? Thanks again! Jonh

Restrorob
03-27-2007, 08:20 PM
You read it like a graph, Maybe this will clear it up.


http://i107.photobucket.com/albums/m314/Restrorob/FB460TestGraph.jpg

jonh
04-01-2007, 11:57 PM
thanks for the help i ordered the igniter.I will let you know if that was the problem.

Kiss4aFrog
03-09-2014, 03:31 PM
I'm having a problem with mine and thought I'd poke this just to see if Restrobob might get an Email and post what he found on his.

At least this gives me the specs for testing. :clapping:

Restrorob
03-09-2014, 05:43 PM
I didn't find anything on MINE, I don't own one..... Only repair them for customers.....

Patriot Services
03-09-2014, 05:55 PM
Look for a cheaper one than 80 bucks. Such as mfgsupply.com #31-9334
Posted via Mobile Device

Kiss4aFrog
03-09-2014, 06:29 PM
Sorry, I grabbed the wrong name. Looking to see if "John" fixed his.

Patriot Services
03-09-2014, 09:35 PM
From 7 years ago? Yea, its fixed. One way or another.
Posted via Mobile Device